Hanging Finisher (Optional: MJ-1031)
1
2
3
Push the lever to separate the Hanging Finisher
from the equipment, and then open the cover.
3
Install a new staple case into the staple cartridge.
5
Install the staple cartridge.
2
2
2
Take off the staple cartridge, and then take the
empty staple case out of the staple cartridge.
4
Press down the transparent cover and pull out the
seal.
6
2
Close the Finisher cover, and then install the
Hanging Finisher to the equipment.
Refer to the Troubleshooting Guide for details.
Adding Staples
3
2
2
2
1
2
3
4
5
5