Dvb Tuning - Panasonic DMR-BCT83 Operating Instructions Manual

Convenient functions
Basic Settings

DVB Tuning

Favourites Edit
You can create four favourites of channels for
making viewing and recording easier.
After editing as follows, save the Favourites.
Press [RETURN ], then press [OK].
• To select the other Favourites list:
Press the green button.
• To add channels to the Favourites list:
Select the channel in the "All DVB Channels"
column, then press [OK]. Repeat this step.
• Red: Change the sorting mode.
• Yellow: Add continuous block of channels to
the list at once.
• Press [3, 4] to make the block, then press
[OK].
• Blue: Select the Category.
• To change the order of the channels list:
1 Select the channel in the "Favourites"
column to move, then press the green
button.
2 Select the new position, then press the
green button.
• To delete channels:
Select the channel in the "Favourites" column,
then press [OK].
• Yellow: Delete all channels.
• To change the name of the Favourites list:
1 Press the red button in the "Favourites"
column.
2 Press [3, 4, 2, 1] to select a character,
then press [OK].
Repeat this step to enter other characters.
• Red: Delete a character.
• Blue: Delete all characters.
3 Press [RETURN
86
VQT5D92
].
Auto Setup
You can restart the Auto Setup. (
1 Select "Yes", then press [OK].
• If the country selection screen appears:
Select the country, then press [OK].
2 Follow the on-screen instructions and make
the following settings.
1 Select the items and change the items.
(For details, consult the cable provider.)
Channel number allocation
• Preset Channel Number
• Operator's Channel Number ( LCN )
Search Mode
• All Channels
Search for all channels.
• Free Channels
Search for free channels only.
Scan Mode
• Quick:
Scans the suitable frequency for the
selected country.
• Full:
Scans the whole frequency range.
Frequency/Symbol Rate/Network ID
Normally set to "Auto".
If "Auto" is not displayed or if necessary,
enter the value specified by your cable
provider with number buttons.
2 Select "Start scan", then press [OK].
Auto Setup starts.
• The timer recording programmes are cancelled.
22)