Table of Contents
Advertisement
Getting started
Settings
Easy Setting
1
Turn on the TV, then select the appropriate
AV input to suit the connections to this unit.
2
Press [Í] on the remote control or [Í/I] on
this unit.
• The Easy Setting will start at the initial
power on.
3
Select language, then press [OK].
4
Select country, then press [OK].
5
Select the channel number allocation, then
press [OK].
• Normally set to "Operator's Channel
Number ( LCN )".
6
Select "Start Auto Setup", then press [OK].
• Frequency
Auto
The preset frequency will be
automatically used.
Manual
Enter the frequency specified by your
cable provider with number buttons.
• Network ID
Auto
The preset Network ID will be
automatically used.
Manual
Enter the Network ID specified by your
cable provider with number buttons.
• Frequency and Network ID settings may be
necessary depending on the cable provider. For
details, consult the cable provider.
22
VQT5D92
7
Auto Setup will start automatically.
(This operation may take some time.)
e.g.,
Auto Setup
Progress
0%
This will take about 3 minutes.
No.
Channel Name
Free TV: 0
Pay TV: 0
Searching
When tuning is completed, press [OK].
8
Clock will be set automatically.
If the clock setting screen appears, set the
time manually (
9
Set Quick Start to "On", "Off" or "Timer
Setting for Quick Start", then press [OK].
• On
It is possible to start quickly from standby
mode.
• Off
Power consumption in standby mode is
minimized. (
117)
However, startup time from standby mode
will be longer.
• Timer Setting for Quick Start
"Quick Start" is activated when the set time
comes.
100%
Type
Quality
Radio: 0
99, Clock).
Advertisement
Table of Contents
