Operation During Recording - Panasonic DMR-BCT83 Operating Instructions Manual

Table of Contents

Advertisement

To convert the recording mode after recording
in DR mode
Refer to "File Conversion". (
To confirm whether the conversion is
completed
Refer to "To confirm whether the conversion is
completed". (
52)
To cancel a conversion
Refer to "To cancel a "During standby"
conversion". (
53)
• One recording will terminate when simultaneous recording
is being done and timer recording starts.
• When the programme recorded in DR mode is converted,
teletext will not be recorded.
• Following contents or media cannot be played back while
recording.
- Xvid and MKV file
- photo
- USB HDD (For data files,
• Copying cannot be performed while recording.
• When "Automatic Standby after OTR" is set to "On" (
this unit is turned to standby mode if this unit is not
operated for approximately 5 minutes after completing
"Automatic Stop" or "Recording Time".
• When a programme is recorded in encrypted form,
conversion will not start until decryption has finished.
(
34)
• The title before conversion (the title recorded in DR mode)
will be deleted once the conversion is completed.
• Conversion will take about the same time as the recorded
duration.
• When the HDD does not have enough remaining space,
conversion will not start.
• Conversion is stopped when this unit is turned on.
Conversion will start from the beginning again once the unit
is switched to standby mode.
• The conversion will not start if the timer recording is
scheduled within the time required for the conversion.
• When converted, audio content and subtitle will be
converted with the same settings as at the start of
recording.
52)
9) and USB memory
98),

Operation during Recording

To check the recording programme
Press [STATUS
].
e.g., While recording two programmes simultaneously
HDD
Recording programme
REC1/OTR AUTO
displayed on the TV
5
REC2
Recording programme not displayed on the TV
To stop recording
Press [STOP ∫].
When recording one programme:
If the following screen appears
Stop Recording
1
Recording of this programme is in progress.
Stop this recording ?
Yes
No
OK
RETURN
Select "Yes", then press [OK].
When recording two programmes:
If the following screen appears
Stop Recording
2 recordings are in progress.
Which recording would you like to stop ?
1
2
OK
RETURN
1 Select the programme, then press [OK].
2 Select "Yes", then press [OK].
Recording
33
VQT5D92

Advertisement

Table of Contents
loading

This manual is also suitable for:

Dmr-bct73

Table of Contents