Warranty Period; Post Installation Inspection Checklist - Sanden GAUS-315EQTD Installation Manual

Hide thumbs Also See for GAUS-315EQTD:
Table of Contents

Advertisement

9. Repair and/or replacement of the Heat Pump Water Heater System due to scale formation
in the waterways or the effects of either corrosive water or water with a high chloride or
low pH level when the water heater has been connected to a scaling or corrosive water
supply or a water supply with a high chloride or low pH level as outlined in the Owner's
Guide and Installation Manual.
Subject to any statutory provisions to the contrary, this warranty excludes any and all claims
for damage to furniture, carpets, walls, foundations or any other consequential loss either
directly or indirectly due to leakage from the Heat Pump Water Heater System, or due to
leakage from fittings and/or pipe work of metal, plastic or other materials caused by water
temperature, workmanship or other modes of failure.

Warranty Period

Subject to the Warranty Conditions and Exclusions stated above, your Sanden Heat Pump Water
Heater System is warranted as follows:
Heat pump unit –
Tank unit – Fifteen years from date of installation

Post installation inspection checklist

On completion of the installation, inspect and check off each item in the charts on the
following page once the inspection has been completed remove the inspection table and
hand to the customer.
Three years from date of installation
Sanden Heat Pump – Installation Manual
Page 24 of 26

Advertisement

Table of Contents
loading

This manual is also suitable for:

Gaus-315eqte

Table of Contents