Robe DigitalSpot 7100 DT User Manual
  1. Manuals
  2. Brands
  3. Robe Manuals
  4. Lighting Equipment
  5. DigitalSpot 7100 DT
  6. User manual
Robe DigitalSpot 7100 DT User Manual

Robe DigitalSpot 7100 DT User Manual

Dt series
Hide thumbs Also See for DigitalSpot 7100 DT:
Table of Contents

Advertisement

Quick Links

Download this manual
Version 1.4

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the DigitalSpot 7100 DT and is the answer not in the manual?

Questions and answers

Related Manuals for Robe DigitalSpot 7100 DT

Summary of Contents for Robe DigitalSpot 7100 DT

  • Page 1 Version 1.4...

  • Page 2: Table Of Contents

    4. Fixture exterior view ..............................7 5. Video inputs ................................8 6. Connection to the mains ............................8 6.1 Powering on the DigitalSpot 7100 DT ........................8 6.2 “Power down” mode ............................8 7. Shutting down the DigitalSpot 7100 DT ........................9 8.
  • Page 3 DigitalSpot 7100 DT 20.1 Kaleidoscopic effect ............................37 20.2 Circular effect (Fish eye) ........................... 39 20.3 RGB (CMY) effects ............................. 39 20.4 Iris effect on layer ............................. 44 20.5 Auto iris effect on layer ............................ 47 20.6 Zoom effects on layer ............................47 20.7 Another graphic effects on layers........................
  • Page 4 DigitalSpot 7100 DT 31.10 System restore ..............................98 31.11 Cleaning ................................99...

  • Page 5: Safety Instructions

    Please consider that damages caused by manual modifications to the device are not subject to warranty. The DigitalSpot 7100 DT was designed for indoor use and it is intended for professional application only.It is not for household use.

  • Page 6: Unpacking

    Furthermore, any other operation may lead to dangers like short- circuit, burns, electric shock, lamp explosion, crash etc. To switch the DigitalSpot 7100 DT off, always use either option "Fixture Off" in main menu or set a DMX value of channel 8 between 240-249.

  • Page 7: Introduction

    DigitalSpot 7100 DT 3. Introduction The DigitalSpot 7100 DT features moving head with a video projection and automated lighting technologies including a DMX controllable digital media server installed in a fixture´s base. The built-in 32-bit Graphics Engine utilizes Linux and DirectX application programming interface to provide extensive image control of graphic objects.

  • Page 8: Video Inputs

    Earth The earth has to be connected! 6.1 Powering on the DigitalSpot 7100 DT When the fixture is connected to the AC mains supply and the power switch is on, it automatically begins a homing procedure to verify that all functions of the fixture and its internal projector are in good order.

  • Page 9: Shutting Down The Digitalspot 7100 Dt

    1. A DMX controller can switch off the projector lamp and shut down the fixture with the "Lamp Off, Fixture Off" option on the control channel 8 (see DMX protocol). 2. The option "Fixture Off" in main menu of DigitalSpot 7100 DT switches off the projector´s lamp and shuts down the fixture.

  • Page 10: Rigging The Fixture

    Note: There is a tolerance among these numbers due to optical component variations. We recommend that if you intend to permanently install the DigitalSpot 7100 DT, you should physically test the projection size and distance using the actual fixture in m before you permanently install it, so as to make allowance for this projector's optical characteristics.
  • Page 11 DigitalSpot 7100 DT We recommend avoiding dusty/smoky environments when operating the fixture. Usage in these environments may cause a poor image quality. When using the fixture under dusty or smoky conditions,dust may accumulate on a lens, liquid crystal panels, or optical elements inside the projector. Such condition may degrade the quality of the projected image.
  • Page 12 DigitalSpot 7100 DT Before taking into operation for the first time, the installation has to be approved by an expert!

  • Page 13: Dmx 512 Connection

    DigitalSpot 7100 DT 10. DMX 512 connection The fixture is equipped with both 3-pin and 5-pin XLR sockets for DMX input and output. Only use a shielded twisted-pair cable designed for RS-485 and 3-pin/5-pin XLR- connectors in order to connect the controller with the fixture or one fixture with another.
  • Page 14 DigitalSpot 7100 DT The the DigitalSpot 7100 DT is equipped with 8-pin RJ- 45 socket for Ethernet input. Use a network cable category 5 (with four “twisted” wire pairs) and standard RJ-45 plugs in order to connect the fixture to the network.

  • Page 15: Folder Organization

    DigitalSpot 7100 DT 12. Folder organization The library structure is reflected on the hard drive where all files for the library are stored. The whole library is contained within a special folder called ‘Media’. Inside the Media folder is a collection of folders (000,001...240) each named with a 3-digit number. Each folder following this convention represents a library folder and the 3-digit number represents the name of the folder.

  • Page 16: Control Menu Map

    DigitalSpot 7100 DT 13. Control menu map Default settings=Bold print Menu Level 1 Menu Level 2 Menu Level 3 Menu Level 4 Menu Level 5 Menu Level 6 Menu Level 7 Menu Level 8 Fixture Set DMX DMX Settings 001-512...
  • Page 17 DigitalSpot 7100 DT Menu Level 1 Menu Level 2 Menu Level 3 Menu Level 4 Menu Level 5 Menu Level 6 Menu Level 7 Menu Level 8 Lamp Lamp On, Off Presetting On/Power On Lamp Off via On, Off Lamp On If DMX...
  • Page 18 DigitalSpot 7100 DT Menu Level 1 Menu Level 2 Menu Level 3 Menu Level 4 Menu Level 5 Menu Level 6 Menu Level 7 Menu Level 8 Numerical Order Microphone 1..10..20 Sensitivity Verbose Mode Verbose Mode 0 Verbose Mode 1...
  • Page 19 DigitalSpot 7100 DT Menu Level 1 Menu Level 2 Menu Level 3 Menu Level 4 Menu Level 5 Menu Level 6 Menu Level 7 Menu Level 8 Save Start Step 1-99 Save and Copy End Step 1-99 Music Trigger On, Off...
  • Page 20 DigitalSpot 7100 DT Menu Level 1 Menu Level 2 Menu Level 3 Menu Level 4 Menu Level 5 Menu Level 6 Menu Level 7 Menu Level 8 Lamp Strikes Total Strikes Resetable Strikes Fixture Projector Current Temperatures temp. 1 Projector temp.
  • Page 21 DigitalSpot 7100 DT Menu Level 1 Menu Level 2 Menu Level 3 Menu Level 4 Menu Level 5 Menu Level 6 Menu Level 7 Menu Level 8 Allow Yes/No Anonymous HTTP Access Set Account Allow Yes/No Anonymous USB Data USB1...

  • Page 22: Operating Modes

    DigitalSpot 7100 DT 14. Operating modes Before operating the DigitalSpot 7100 DT from a DMX 512 controller, you need to define the source of DMX data, which may be: DMX 512 - data is transmitted over standard DMX cables. Set a valid DMX start address, which is defined as the first channel from which the DigitalSpot 7100 DT will respond to the controller.

  • Page 23: Fixture Information

    Product IDs --- Select the function to read the MAC address and the RDM UID code. 15.3 Personality Use this menu to modify DigitalSpot 7100 DT operating behaviour. Pan Reverse --- Select this function to invert the pan movement. Tilt Reverse --- Select this function to invert the tilt movement.
  • Page 24 Ceiling Projection --- When this function is "On", a picture is top (bottom and left) right reversed.This function enables to project the image from a ceiling mounting of the DigitalSpot 7100 DT. Rear projection --- When this function is "On", picture is left (right) reversed.

  • Page 25: Lamp On/Off

    DigitalSpot 7100 DT Protocol Version --- the item allow you to select a desired protocol version. Gobo Selection Mode --- Use this menu to select desired sorting of media files in media subfolders. Alphabetical Order --- The media files are assigned to DMX values in an alphabetical order.

  • Page 26: Stand-Alone Setting

    Running program is possible to pause by pressing the [ENTER] button. Edit Program --- Select this menu to edit or create a program. The DigitalSpot 7100 DT has 10 freely-programmable programs, each up to 99 steps. Each program step has a step time, during which effects last in a current step.

  • Page 27: Preview Mode

    ( on the wall and on the display) 15.8 Reset functions The DigitalSpot 7100 DT can be reset totally or in function modules. Select a desired function to run a reset: Reset Graphics Engine --- This function resets a graphics engine.
  • Page 28 Led Panel Board 2 [°C].....temperature in the LED module 2 Air Filters --- Regular cleaning of the air filters is very important for the DigitalSpot 7100 DT life and performance. Buildup of dust, dirt and fog fluid residues reduces the fixture´s light output and cooling ability. The two items of menu help you to keep cleaning period of the air filters.

  • Page 29: Special Functions

    , otherwise the refreshing process runs automatically at starting up of the DigitalSpot 7100 DT. FTP Server --- The FTP (File Transfer Protocol) server is used to transfer files between the fixture and a PC over an ethernet network by means of FTP client running on your PC.

  • Page 30: Fixture Off

    16.1 Global keystone parameters If an image is output from the DigitalSpot 7100 DT at an angle the image may be skewed. Eight keystone channels (KeyStone Top Left X, KeyStone Top Left Y, KeyStone Top Right X, KeyStone Top Right Y, KeyStone Bottom Right X, KeyStone Bottom Right Y, KeyStone Bottom Left X, KeyStone Bottom Left Y) adjust the image shape.It is possible to...

  • Page 31: Layer Keystone Parameters

    DigitalSpot 7100 DT Default DMX value is 0, it means that no keystone correction has been used. Setting all keystone values to 0 will place all four corners of the image at the four corners of the projector output. The keystone values can also be used to create interesting skewing effects.
  • Page 32 DigitalSpot 7100 DT To adjust desired image shape you can use the following (keystone) parameters on the gobo layer 2: 1. Layer zoom in X and Y direction. The channels Gobo zoom X coarse and Gobo zoom X fine allow 8-bit/16-bit zooming in X-direction.
  • Page 33 DigitalSpot 7100 DT 3. Layer skewing along X and Y axis. On the channel Gobo effect 1 selection adjust a DMX value=150 and using the control parameters 1 an 2 you can skew the image in either X or Y axis.
  • Page 34 DigitalSpot 7100 DT On the channel Gobo effect 2 selection adjust a DMX value=150 and using the control parameters 1 you can squeeze the image in Y axis. Note. To allows this effect, the channel Gobo effect 1 selection has to be set to DMX=150.

  • Page 35: In Frame And Out Frame Parameters

    DigitalSpot 7100 DT After shaping the image by means of the parameters stated above, you can apply the global banner effects on the whole graphics output and this final image should appear for instance like this: 17. In Frame and Out Frame parameters You can select any segment of a video file for playback by assigning parameters for In Frame (start point) and an Out Frame (end point) as pictured below.

  • Page 36: Video Control

    DigitalSpot 7100 DT 18. Video Control The channel Gobo control defines how the current layer will be ‘composed’ with the previous layers and the playback options in each mode .The Digital Spot 7100 supports the following options: Copy mode (0-17 DMX): In this mode, the pixels of the layer are written on top of the previous layers.

  • Page 37: Graphic Effects

    DigitalSpot 7100 DT 20. Graphic effects There are two gobo effect channels on each gobo layer (Gobo effect 1 selection, Gobo effect 2 selection), which offer amount of effects that can be applied to the current running picture/video. Each effect channels have three control channels - Parameter 1, Parameter 2, Parameter 3 –...
  • Page 38 DigitalSpot 7100 DT DMX value Mosaic effect Examples Source picture Static Dynamic mode mode Centered Kaleidoscope (rough Note: As the effect does not cover all projection are, the image from the lower layer can be displayed at the sides of the effect.

  • Page 39: Circular Effect (Fish Eye)

    DigitalSpot 7100 DT If the effect “Centered Kaleidoscope (fine) ” is selected, meaning of the Parameter 1 is the following: DMX value Function 0 - 255 Shape and a number of mirroring planes Gobo effect 1- Parameter 2: Size and pulsation of the segments content...
  • Page 40 DigitalSpot 7100 DT Associated control parameters: Control Controlled item Function parameter value Parameter 1 Red colour element 0-255 no adjustment  minimum saturation Parameter 2 Green colour element 0-255 no adjustment  minimum saturation Parameter 3 Blue colour element 0-255 no adjustment ...
  • Page 41 DigitalSpot 7100 DT Swap RGB to GBR (DMX value=56) – the effect swaps red to green, green to blue and blue to red colour in all pixels. Associated control parameters: Control Controlled item Function parameter value no adjustment (0 )  green (255)
  • Page 42 DigitalSpot 7100 DT Invert and swap RGB to BRG (DMX value=60) – the effect swaps red, green and blue colour to inverted BRG in all pixels. Associated control parameters: Control Controlled item Function parameter value no adjustment (0 )  full inverted blue (255)
  • Page 43 DigitalSpot 7100 DT RGB scale (DMX value=68) – the effect changes the output intensity of red, green and blue colour in all pixels. Associated control parameters: Control Controlled item Function parameter value Changes the inclination of conversion line for red colour from max.

  • Page 44: Iris Effect On Layer

    DigitalSpot 7100 DT 20.4 Iris effect on layer The effect allows to simplify transition effects between layers and it can be activated on each gobo layer. On the effect can be applied layer´s X/Y zoom, X/Y position and rotation parameters. Another possible application of the iris effect is to use it as the mask function to mask unwanted parts of the image.
  • Page 45 DigitalSpot 7100 DT Gobo Effect 1-Parameter 3: Texture modes applied on the iris surface Parameter 3 DMX value Zoom X Zoom X + Position X (Mode) (Mode 1) 10-19 (Mode 2) 20-29 (Mode 3) 30-39 (Mode 4) The following modes (5-8) include black mask...
  • Page 46 DigitalSpot 7100 DT Parameter 3 DMX value Zoom X Position X (Mode) 50-59 Dimmer on the layer 3= 255 DMX Dimmer on the layer 3= 255 DMX (Mode 6) Dimmer on the layer 3= 1 DMX Dimmer on the layer 3= 1 DMX...

  • Page 47: Auto Iris Effect On Layer

    DigitalSpot 7100 DT 20.5 Auto iris effect on layer The effect behaves similar as Iris effect on layer, but it is auto- triggered by gobo changes. The iris effect on layer can be activated on each gobo layer if you set the Gobo Effect 1 Selection channel to a DMX value of 92.

  • Page 48: Another Graphic Effects On Layers

    DigitalSpot 7100 DT 20.7 Another graphic effects on layers 1. Swirl effect Activation channel Gobo Effect 2 Selection (on each layer) Default value Activation DMX value Control: Parameter 1 Radius: 0-255DMX - min.  max Angle: 0-127DMX - turning by 360° to the right...
  • Page 49 DigitalSpot 7100 DT 3. Cross-stitching effect Activation channel Gobo Effect 2 Selection (on each layer) Default value Activation DMX value Control: Parameter 1 Pattern density: 0-255 DMX - max.  min. Colour of stitch: 0-127 DMX - coloured Parameter 2...

  • Page 50: Media Content Management

    DigitalSpot 7100 DT 21. Media content management As you seen earlier in chapter "12. Folder organization", the DigitalSpot 7100 DT uses the root folder named "Media". This folder contains subfolders (000,001...240) and inside each subfolder is the collection of media that the subfolder holds.
  • Page 51 DigitalSpot 7100 DT After network configuration, type the IP address of the DigitalSpot 7100 DT in address line in your Windows explorer window. Use this format / (e.g. ftp://2.236.2.88/- see picture below). ftp:// 2.X.X.X If all settings are proper, you will see "Media" and "Update" folders in the Windows explorer window and now you can work with them as local folders and files.
  • Page 52 DigitalSpot 7100 DT 2. FTP client in Mozilla Firefox If you use Mozilla Firefox as your web browser, you can install FTP client into the browser. To install FTP client for Mozilla Firefox on your computer. 1. Run Mozilla Firefox.
  • Page 53 DigitalSpot 7100 DT After installing FTP client, run Mozilla Firefox and type the IP address of desired fixture in ftp format e. g. ftp://2.97.181.89 and a Fire FTP window will appear. If you do not want to keep in mind IP addresses of all connected fixtures, you can use the Remote configuration program (by typing the IP address of one fixture to the web browser in http format e.

  • Page 54: Moving Files Between Networked Fixtures

    DigitalSpot 7100 DT 21.2 Moving files between networked fixtures The option "Contents Synchronization" in a "Remote control program" running on your PC offers easy control of file transfer between networked fixtures via web browser. (For detail description of the Remote configuration program see chapter "Remote control of the fixture via web browser"...

  • Page 55: Remote Control Of The Fixture Via Www Browser

    DigitalSpot 7100 DT 22. Remote control of the fixture via WWW browser The DigitalSpot 7100 DT offers a remote control of the fixture and diplaying useful information about the fixture including the gobo folders contents via www browser. The fixtures has to be connected via an ethernet (with Art-Net communication protocol) to a network. The PC or light console has to be connected to the same network as the fixtures.
  • Page 56 DigitalSpot 7100 DT Status Messages -the window under this option displays error and status messages. Special Functions - the window offers several items: "Thumbnails size" - changing the size of the thumbnails. The change takes effect in the item "Content". If you change the thumbnail size, use the button "Update"...
  • Page 57 DigitalSpot 7100 DT Content - by entering this window a complete overview of all gobo folders is offered, from which the folder to be view can be selected.Click a desired folder to display its content. Click a desired picture to zoom it in.
  • Page 58 DigitalSpot 7100 DT Remote Graphics Output - preview of the current projecting output. Remote RNS Display - the window "takes" the fixture´s control panel. You can browse and adjust all items in this fixture menu by means of your keyboard. Use the Up/Down and Enter/Escape keys.

  • Page 59: Picture Merging

    The resulting seamless image consists of the images of the individual projectors. It is possible to create an image field up to 64 segments (non-mirrored configuration). You can display the original DigitalSpot 7100 DT gobos/videos or custom gobos/videos from user folders. 23.1 Picture merging control channels Global effect 1 DMX values in a range of 1-7 enable the picture merging procedure.
  • Page 60 DigitalSpot 7100 DT Global effect 1- Parameter 1 The DMX value from the range of 1- 235 allows selection of desired image field configuration according to the tables on the following pages. Image field configuration Non-mirrored configuration Image field Image field...
  • Page 61 DigitalSpot 7100 DT Image field Total number of Image field Total number of value Configuration fixtures value Configuration fixtures W x H W x H 1 x 7 11 x 1 7 x 2 2 x 11 2 x 7...
  • Page 62 DigitalSpot 7100 DT Horizontally mirrored configuration Image field Image field Total number of Total number of configuration configuration fixtures in base fixtures in base value of base matrix value of base matrix matrix matrix W x H W x H...
  • Page 63 DigitalSpot 7100 DT Vertically mirrored configuration Image field Image field Total number of Total number of configuration configuration fixtures in base fixtures in base value of base matrix value of base matrix matrix matrix W x H W x H...
  • Page 64 DigitalSpot 7100 DT Vertically and horizontally mirrored configuration Image field Image field Total number of Total number of configuration configuration fixtures in base fixtures in base value of base matrix value of base matrix matrix matrix W x H W x H...
  • Page 65 DigitalSpot 7100 DT The mirrored image configurations bring 2 advantages: 1. Resolution of the source image and merged images on the wall is the same in comparison with non-mirrored configuration (if you use suitable mirrored configuration – see example 3 below).
  • Page 66 DigitalSpot 7100 DT Global effect 1- Parameter 2 The DMX values from the range of 0-255 are used to step segment by segment throw the image grid. The DMX value of 0 corresponds to the upper left segment of the image grid. The stepping runs from the left to the right and...

  • Page 67: Picture Merging Example

    DigitalSpot 7100 DT Global effect 2 A DMX value of 20 enables fine adjusting of the red, green and blue gamma curve at overlaping edges to achieve consistent colour (brightness) of these parts of image. Note. After selecting desired image segment for the gamma correction (by means of the Global effect 1 - Parameter 2), set the channel Global effect 1 - Parameter 3 to 0 in order to display blended edges of the picture segment.

  • Page 68: Pre-Cut Content Mode For Picture Merging

    DigitalSpot 7100 DT 24. Pre-cut content mode for Picture Merging The mode is useful when you want to cover large projection area with full resolution for each projector or you don't want to be restricted with limits of matrix configuration.
  • Page 69 DigitalSpot 7100 DT Size of segments in X-axis: L /[x-(b/100)*(x-1)] partX totalX =1024/ [3-(10/100)*(3-1)] the size of overlapping edges was selected 10% (b=10) partX = 366 pixels partX Since the size of the segments in Y-axis is the same as at the source picture, each of the 3 fixtures will project picture with resolution of 366x768 pixels.

  • Page 70: Effect Video Synchronization

    DigitalSpot 7100 DT 25. Effect video synchronization The synchronization option can be set separately for each gobo layer (channels Synchronization to ID). The fixture synchronization acts with the fixture ID which is defined as the last number of fixture´s IP address. This fixture ID is shown on the fixture´s display.

  • Page 71: Projection Onto Angular, Cylindric Or Spheric Surfaces

    DigitalSpot 7100 DT 26. Projection onto angular, cylindric or spheric surfaces If a projection on curved surface is required a correction of the shape distortions is necessary. The DigitalSpot 7100 DT supports projection onto angular screens, cylinders and spheres. 26.1 Curved surface support channels...
  • Page 72 DigitalSpot 7100 DT Global effect 2- parameter 2 This parameter enables to adjust the horizontal length of the edge. A DMX Value of 128 = no adjustment, values below 128 move the edge to the left, values above 128 move the edge to the right.

  • Page 73: Rectangle Onto Circle (Sphere) Mapping With Picture Merging

    DigitalSpot 7100 DT Note: If a projection of rectangle (square) on a circle (sphere) is selected on the channel Global Effect 2 (DMX value of 10 or 11), the meaning of the Keystone parameters in a DMX chart will be changed as follows:...

  • Page 74: Video Processing On Gobo Layers From A Streaming Video Server

    27. Video processing on gobo layers from a streaming video server A streaming video is a video that is continuously sent by one device (e.g. PC) and received by another device (DigitalSpot 7100 DT) over an ethernet network. 1. TightVNC client The TightVNC is a free remote control software package available at http://www.tightvnc.com/download.php .
  • Page 75 DigitalSpot 7100 DT 4.Switch off the Firewall on the PC, where the TightVNC server is installed. Hire is an example for Windows XP: 5. Run a Remote control by means of WWW browser at your PC, select option “Remote content” and write IP address of TightVNC server to the Source Address line in the following format : vnc:// xxx.xxx.xxx (e.g.
  • Page 76 DigitalSpot 7100 DT - Click on the "Properties" button and the following window will open. - Click on the item "Internet Protocol (TCP/IP)" and the Internet Protocol Properties window will open. Set IP address to something like 2.X.X.X with an IP mask of 255.0.0.0...
  • Page 77 DigitalSpot 7100 DT 3. Install a VLC media player. - click on a VLC media player self-extracting package located on the hard disk and follow the on-screen instructions. After installing it, run this VLC media player. In a horizontal menu "File" click on "Open" and the following window will open.
  • Page 78 PC Desktop streaming. The desktop streaming enables you to sent your presentation directly to the DigitalSpot 7100 DT via an ethernet network. You do not need extra cables for connecting video inputs of the DigitalSpot 7100 DT with your PC.
  • Page 79 DigitalSpot 7100 DT A different setting of VLC media player for streaming of the PC desktop is required. Type the following line in the "Customize" field of the Open window: screen:// screen-fps=10 :screen-caching=100 Space The Stream output window has the same setting like for video streaming except the field "Bitrate (kb/s)" which should be set at the value of 8192.
  • Page 80 DigitalSpot 7100 DT Type the IP address of the DigitalSpot 7100 DT which is to project data from a remote streaming video source in your WWW browser to run the Remote Control program. Select the option "Remote Content" and the following window will open: Type in the "source Address"...

  • Page 81: Rdm

    RDM allows explicit commands to be sent to a device and responses to be received from it. The ROBE DreamBox allows to utilize all DigitalSpot 7100 DT RDM functionality.Please read the Robe universal interface user manual for detail description of RDM possibilities.

  • Page 82: Citp/Msex Protocol

    For more information see at http://www.citp-protocol.org/ This screenshot comes from Chamsys console MagicQ working together with the Robe DigitalSpot 7100DT. The CITP protocol allows to report folders for live input and streaming. These icons serves for thumbnails preview on the control console:...

  • Page 83: Technical Specifications

    DigitalSpot 7100 DT 29. Technical specifications Electrical specifications Auto-switching power supply Input voltage range: 100-120V/ 200-240V AC, 50/60 Hz Max. Pover Consumption @ 230V: 780W (800VA), I=3.3A Power factor: 0.96 Projector Specifications Model:LX700 Light output:7000 ANSI lumens Lamp:330 W NSHA Rated lamp life: 3,000 h (eco mode);...
  • Page 84 Electromechanical Effects Zoom Focus Mechanical iris Control 5“ TFT LCD display & Robe navigation system Web access for total control of fixture (user library management) Media Content Synchronization in web interface Protocol USITT DMX 512 169 control channels max. Support of CITP/MSEX protocol...
  • Page 85 DigitalSpot 7100 DT Accessories Omega holder (No.99010420)........2 pieces USB 2.0 flash drive with a System recovery utility..1 piece Optional Accessories SDI/ASI capture card set (P.N. 99013222) – includes capture card SDI/ASI DTA-145-SDP and mounting accessories SDI-HD DS 3500/7100 capture card set (P.N. 9901 3809) – includes capture card Decklink SDI and mounting accessories Video Capture Card DVI-VGA FULL HD DS 3500/7100 (P/N.99014484) –...
  • Page 86 DigitalSpot 7100 DT Illuminance/Image size chart for Long Throw Optics (throw distance ratio 2.7 - 3.5 : 1)
  • Page 87 DigitalSpot 7100 DT Illuminance/Image size chart for Short Throw Optics (throw distance ratio 1.2 - 1.7 : 1)

  • Page 88: Error And Information Messages

    DigitalSpot 7100 DT 30. Error and information messages The warning icon (triangle) on the bottom-right side of the fixture´s screen indicates some error or information message which appears on the screen by pressing the [ESC] button. Pan Error The message will appear after the reset of the fixture if the yoke´s magnetic-indexing circuit malfunctions (sensor failed or magnet is missing) or the stepping motor is defective or its driving IC3 on the PCB in the fixture base.
  • Page 89 DigitalSpot 7100 DT LED Temperature Sensor 2 Short The message informs you that there is not communication between the sensor measuring the temperature of the LED module 2 and the control PCB. This connection is in short circuit. Dataprojector Temp. Read Error System message from dataprojector.

  • Page 90: Maintenance

    DigitalSpot 7100 DT 31. Maintenance 31.1 Replacing the lamp Turn the power off and disconnect the fixture from the mains. If the lamp is hot, avoid burns by waiting for approximately 45 minutes until the lamp has cooled. 1. Use the tilt lock button (2) to secure the moving head in a horizontal position.

  • Page 91: Replacing The Projector

    DigitalSpot 7100 DT 31.2 Replacing the projector If you need to remove the data projector, turn the power off and disconnect the DigitalSpot 7100 DT from the mains. If the projector lamp is on, wait 25 minutes until the projector has cooled.

  • Page 92: Accessing To The Projector Control Buttons

    DigitalSpot 7100 DT 8. Unscrew the three covers (9), (10), (11) from the pro projector housing . 31.3 Accessing to the projector control buttons If you need to use the projector control buttons which are situated at the side of the projector, move the fixture...

  • Page 93: Installing The Sdi/Asi Capture Card

    DigitalSpot 7100 DT 31.5 Installing the SDI/ASI capture card To install the SDI/ASI capture card. 1. Disconnect the fixture from power. 2. Remove both top covers of the fixture base by unscrewing 14 screws. 3. Remove the cover plate of an unused slot on the rear panel of the fixture by unscrewing two screws M3x10 (1).

  • Page 94: Installing The Optional Optics

    31.6 Installing the optional optics To install the long throw optics (or short throw optics) follow the steps: 1. Disconnect the DigitalSpot 7100 DT from power. 2. Remove the front cover of the fixture head (2) by loosening the 4 quarter-turn fasteners (1).

  • Page 95: Replacing The Fixture Air Filters

    DigitalSpot 7100 DT 31.7 Replacing the fixture air filters Important! Check the air filters periodically and clean before they become clogged! Clean the air filters with a vacuum cleaner or you can wash them and put back dry. Replacing air filters in the fixture head.

  • Page 96: Replacing The Filter Cartridge In The Projector

    31.8 Replacing the filter cartridge in the projector. 1. Turn off the DigitalSpot 7100 DT and unplug the AC power cord from the AC outlet. 2. Remove the projector from the fixture chassis as described in the chapter Replacing the projector.

  • Page 97: Resseting The Scroll Counter

    DigitalSpot 7100 DT 2. Use the Point buttons to move the red frame pointer to Filter counter and then press the SELECT button. A dialog box appears showing the Used time option and the Scrolls remaining option. Use the Point buttons to select Used time.

  • Page 98: Replacing The Fuse

    USB ports on the DigitalSpot 7100 DT. Power on the DigitalSpot 7100 DT. When the fixture boots, press Delete key on the keyboard to enter the fixture´s computer SETUP and set the boot from USB drive (Path: "Advanced Bios Features" --- >"1st boot device"---->...
  • Page 99 Apply a non-abrasive camera lens cleaner to a soft, dry cleaning cloth. Avoid using an excessive amount of cleaner. Abrasive cleaners, solvents or other harsh chemicals might scratch a surface. Lightly wipe a cleaning cloth over projection lens. Specifications are subject to change without notice. Copyright © 2012-2018 Robe Lighting s.r.o. - All rights reserved April 30, 2018...
  • Page 100 DMX protocol DigitalSpot 7100 DT - DMX protocol v. 1.1, April 30, 2018 DMX Value Function Type of control Channel 0-255 Pan movement by 530° proportional Pan Fine 0-255 Fine control of pan movement proportional Tilt 0-255 Tilt movement by 280°...
  • Page 101 DMX protocol DMX Value Function Type of control Channel To activate following functions,hold DMX value 3 seconds 130-139 Lamp On step 140-149 Pan/Tilt reset step 150-179 Reserved 180-189 Zoom/Focus reset step 190-199 Mechanical iris reset step 200-209 Total reset step 210-215 Graphic engine reset/software update executing step 216-229 Reserved...
  • Page 102 DMX protocol DMX Value Function Type of control Channel 224-255 Shutter open step LED Dimmer 0-255 Led module dimmer intensity 0 --> 100 % proportional Common digital effects for all gobo layers KeyStone Top Left X 0-255 Move top left corner X value to center (0-default) proportional KeyStone Top Left Y 0-255...
  • Page 103 DMX protocol DMX Value Function Type of control Channel 2500 K step Digital Iris-type selection Circular ,outside-->in,sharp edge step Circular ,outside-->in,fuzzy edge 1 step Circular ,outside-->in,fuzzy edge 2 step Circular ,outside-->in,fuzzy edge 3 step Circular ,outside-->in,fuzzy edge 4 (maximum) step Circular ,inside-->out,sharp edge step Circular ,inside-->out,fuzzy edge 1...
  • Page 104 DMX protocol DMX Value Function Type of control Channel Wedge wipe ,bottom-->up, fuzzy edge 2 step Wedge wipe,bottom-->up, fuzzy edge 3 step Wedge wipe,bottom-->up, fuzzy edge 4 (maximum) step Radial wipe ,left -->bottom,sharp edge step Radial wipe ,left -->bottom,fuzzy edge 1 step Radial wipe ,left -->bottom,fuzzy edge 2 step...
  • Page 105 DMX protocol DMX Value Function Type of control Channel Horizontal two-way band wipe,bottom left-->top right step Vertical one-way band wipe,top left-->bottom right step Vertical one-way band wipe,bottom right-->top left step Vertical one-way band wipe,bottom left-->top right step Vertical one-way band wipe,top right-->bottom left step Vertical two-way band wipe,top right-->bottom left step...
  • Page 106 DMX protocol DMX Value Function Type of control Channel 2 diagonal curtains, top left-->center<-- bottom right step Grid wipe 8x8,bottom right-->top left step Grid wipe 8x8,bottom right-->top left,inverse step Grid wipe 8x8,top right-->bottom left step Grid wipe 8x8,top right-->bottom left,inverse step Grid wipe 16x16,bottom right-->top left step...
  • Page 107 DMX protocol DMX Value Function Type of control Channel 0-255 Positioning from left to right (0-default) proportional Banner left rotation 0-255 Rotation +/- 45° (128-default) proportional Banner right positioning 0-255 Positioning from right to left (0-default) proportional Banner right rotation 0-255 Rotation +/- 45°...
  • Page 108 DMX protocol DMX Value Function Type of control Channel Global effect 1- Parameter 3 0-170 Segment edge display for Pixture merging step 171-180 Showing aspect ratio of image projected on the wall step 181-255 Reserved Global Effect 2 None Vertical inside corner mapping P1, P2,P3 Vertical outside corner mapping P1, P2,P3...
  • Page 109 DMX protocol DMX Value Function Type of control Channel 121-140 Reserved If Grabber Card is installed in the fixture 141-160 VGA input of DVI/VGA grabber card step 161-180 DVI-I input of DVI/VGA grabber card step 181-200 SDI input of SDI/ASI grabber card step 201-220 ASI input of SDI/ASI grabber card step...
  • Page 110 DMX protocol DMX Value Function Type of control Channel Scrub (Display) the selected Out Frame step 28-29 Reserved Video stream 2: 30-37 The same functionality as for Video stream 1 step 38-39 Reserved Substraction mode Video stream 1: step Play forward if dimmer (on layer 1) > 0, looping continuously step Play forward if dimmer (on layer 1) >...
  • Page 111 DMX protocol DMX Value Function Type of control Channel step Play forward if dimmer (on layer 1) > 0, hold on last frame Pause step Play forward in continuous loop step Play forward once and hold on the last frame step No function Scrub (Display) the selected In Frame...
  • Page 112 DMX protocol DMX Value Function Type of control Channel X inv. y rotate P1-speed Tile xy P1-amount Tile xy P1-speed XYZ rot. cube P1-speed XYZ rot. sphere P1-speed X rot. cylinder P1-speed Y rot. cylinder P1-speed Reserved Kaleidoscope none Squeeze in none Squeeze out none...
  • Page 113 DMX protocol DMX Value Function Type of control Channel Gobo disc mirror X none Gobo disc mirror Y none Gobo disc mirror XY none 78-79 Reserved Plane mirror X top inverse none Plane mirror X bottom inverse none Plane mirror Y left inverse none Plane mirror Y right inverse none...
  • Page 114 DMX protocol DMX Value Function Type of control Channel 0-255 Effect control depends on effect Gobo effect 2 Selection No effect Colour to black and white P1-amount Colour to black and white inverse P1-amount Black and white to black and white inverse P1-amount Inversion P1-amount...
  • Page 115 DMX protocol DMX Value Function Type of control Channel Swap RGB to BRG P1, P2, P3 Swap RGB to BGR P1, P2, P3 RGB invert P1, P2, P3 Invert and swap RGB to BRG P1, P2, P3 Invert and swap RGB to GBR P1, P2, P3 Colour to Alpha P1, P2, P3...
  • Page 116 DMX protocol DMX Value Function Type of control Channel 0-255 Position Y fine proportional Gobo zoom X coarse 0-127 Narrowing proportional Centre (128-default) step 129-255 Widening proportional Gobo zoom X fine 0-255 Zoom X fine proportional Gobo zoom Y coarse 0-127 Narrowing proportional...
  • Page 117 DMX protocol DMX Value Function Type of control Channel In Frame Low Defines the beginning of a media file segment as a 0-255 proportional percentage of the movie length (0-default) Out Frame High Defines the end of a media file segment as a percentage of 0-255 proportional the movie length (255-default)
  • Page 118 DMX protocol DMX Value Function Type of control Channel Play forward in continuous loop step Play forward once and hold on the last frame step No function Scrub (Display) the selected In Frame step Scrub (Display) the selected Out Frame step 48-49 Reserved...
  • Page 119 DMX protocol DMX Value Function Type of control Channel 118-255 Reserved Playback Speed Normal Speed step 1-127 Slow speeds from slowest ---> normal proportional Normal Speed step 129-255 Faster than Normal ---> Fastest proportional Gobo rotation and indexing 0-63 Clockwise rotation from fast to slow proportional 64-127 Indexing...
  • Page 120 DMX protocol DMX Value Function Type of control Channel Squeeze out none Bend X none Bend Y none Tile frame none Frame none Plane Flip X none Plane Flip Y none Plane Flip XY none Plane mirror X top none Plane mirror X bottom none Plane mirror Y left...
  • Page 121 DMX protocol DMX Value Function Type of control Channel Plane mirror X,Y-inverse none 87-89 Reserved Circular effect (Fish eye) P1, P2, P3 P1-character, P2-X ratio, P3-Y ratio Iris on layer P1, P2, P3 P1-size, P2-iris type, P3-texture mode Auto Iris effect on layer P1, P2, P3 P1-speed, P2-mask type, P3-opening/closing command 93-94...
  • Page 122 DMX protocol DMX Value Function Type of control Channel Brightness P1-amount RGB to GBR P1-amount RGB to BRG P1-amount RGB to RBG P1-amount Black and white to black and white inverse timed P1-speed Colour to black and white timed P1-speed Colour to inverse timed P1-speed Cycle...
  • Page 123 DMX protocol DMX Value Function Type of control Channel Brightness scale P1, P2 P1, P2 - inclination of conversion line Swirl effect P1, P2, P3 P1-radius, P2-angle, P3-diagonal position Pixelation effect P1, P2, P3 P1-num. of pixels (X), P2-num. of pixels (Y), P3-position in X-axis Cross-stitching effect P1, P2, P3 P1-pattern density, P2-colour of stitch, P3- position in X-axis...
  • Page 124 DMX protocol DMX Value Function Type of control Channel 129-255 Widening proportional Gobo zoom Y fine 0-255 Zoom Y fine proportional Synchronization to ID No function step 1-255 Synchronization to fixture ID proportional Gobo layer 3 Dimmer 0-255 Dimmer intensity from 0% to 100% (255-default) proportional Gobo Folder selection 0-20...
  • Page 125 DMX protocol DMX Value Function Type of control Channel step Play forward if dimmer (on layer 3) > 0, looping continuously step Play forward if dimmer (on layer 3) > 0, hold on last frame Pause step Play forward in continuous loop step Play forward once and hold on the last frame step...
  • Page 126 DMX protocol DMX Value Function Type of control Channel step Play forward if dimmer (on layer 3) > 0, hold on last frame Pause step Play forward in continuous loop step Play forward once and hold on the last frame step No function Scrub (Display) the selected In Frame...
  • Page 127 DMX protocol DMX Value Function Type of control Channel Gobo fine indexing (rotation) 0-255 Fine indexing (rotation) proportional Gobo effect 1 Selection No effect Zoom sinus P1-speed Zoom bump in fade out P1-speed Zoom fade in bump out P1-speed Reserved Zoom in fade P1-speed Zoom out fade...
  • Page 128 DMX protocol DMX Value Function Type of control Channel Plane mirror XY segment 1 P1-speed Plane mirror XY segment 2 P1-speed Plane mirror XY segment 3 P1-speed Plane mirror XY segment 4 P1-speed Plane tile 2x P1-speed Plane tile 3x P1-speed Plane tile 4x P1-speed...
  • Page 129 DMX protocol DMX Value Function Type of control Channel kaleidoscope - mode and mosaic segment selection: Square -static mode P1, P2, P3 Square -dynamic mode P1, P2, P3 Right triangular - static mode P1, P2, P3 Right triangular - dynamic mode P1, P2, P3 Isosceles triangular - static mode P1, P2, P3...
  • Page 130 DMX protocol DMX Value Function Type of control Channel Key Black inverse P1-amount Key White P1-amount Key White inverse P1-amount White flash P1-amount Black flash P1-amount Alpha flash P1-amount Invert flash P1-amount BW Flash P1-amount Black and white to black and white inverse Flash P1-amount Gradient Wipe X P1-amount...
  • Page 131 DMX protocol DMX Value Function Type of control Channel P1-zoom, P2-X-speed, P3- Y-speed 97-149 Reserved Layer keystoning P1,P2,P3 P1-squeezing/stretching in X, P2/P3-compressing & expanding in X/Y 151-199 Reserved P1, P2,P3 Picture merging - R/G/B gamma adjustment in blended edges P 1- red, P 2 - green, P 3- blue 201-255 Reserved Gobo effect 2 -Parameter 1 0-255...
  • Page 132 DMX protocol DMX Value Function Type of control Channel Straming from remote sources step 253-255 Reserved Gobo selection White step 1-255 255 Gobos (one by one) step If Live input (251 DMX) is selected on channel 143: White screen step 1-20 Video composite input-PAL system step...
  • Page 133 DMX protocol DMX Value Function Type of control Channel No function Scrub (Display) the selected In Frame step Scrub (Display) the selected Out Frame step 18-19 Reserved Addition mode Video Stream 1 step Play forward if dimmer (on layer 4) > 0, looping continuously step Play forward if dimmer (on layer 4) >...
  • Page 134 DMX protocol DMX Value Function Type of control Channel Pause step Play forward in continuous loop step Play forward once and hold on the last frame step No function Scrub (Display) the selected In Frame step Scrub (Display) the selected Out Frame step 88-89 Reserved...
  • Page 135 DMX protocol DMX Value Function Type of control Channel XY pos. circle clockwise P1-speed XY pos. scroll up P1-speed XY pos. scroll down P1-speed XY pos. scroll left P1-speed XY pos.scroll right P1-speed Right-left diag. down scroll P1-speed Right-left diag. up scroll P1-speed Left-right diag.
  • Page 136 DMX protocol DMX Value Function Type of control Channel Plane cross tile 5x inverse none Plane cross tiler 5x none Plane cross tiler 5x inverse none Plane bar none Plane bar inverse none Plane bar left-righ none Plane bar top-bottom none Reserved Reserved...
  • Page 137 DMX protocol DMX Value Function Type of control Channel Centered kaleidoscope (fine)-static mode P1, P2, P3 Centered kaleidoscope (fine)-dynamic mode P1, P2, P3 Stat. mode:P1-density, P2-content (coarse), P3-content (fine) Dyn. mode:P1-density, P2-size and pulsation, P3-movement 114-149 Reserved Layer keystoning P1,P2,P3 P1-skewing in X, P2-skewing in Y, P3-squeezing/stretching in Y 151-255 Reserved Gobo effect 1 - Parameter 1...
  • Page 138 DMX protocol DMX Value Function Type of control Channel Mean filter P1-amount Laplacian filter P1-amount Emboss filter P1-amount Sharpness filter P1-amount 45-49 Reserved RGB effects: RGB subtract All Pixels P1, P2, P3 RGB add All Pixels P1, P2, P3 RGB add non-black Pixels P1, P2, P3 RGB substract/add All Pixels P1, P2, P3...
  • Page 139 * DMX value 10 and 11 changes meaning of channels 23-30. See chapter "Projection onto angular, cylindric or spheric surfaces" in the User manual. Copyright © 2012-2018 Robe Lighting s.r.o. - All rights reserved All Specifications subject to change without notice...

Table of Contents