Introduction; Fixture Exterior View - Robe DigitalSpot 7100 DT User Manual

3. Introduction

The DigitalSpot 7100 DT features moving head with a video projection and automated lighting technologies
including a DMX controllable digital media server installed in a fixture´s base. The built-in 32-bit Graphics Engine
utilizes Linux and DirectX application programming interface to provide extensive image control of graphic objects.
The Digital spot 7100 DT uses DMX512 protocol to control hardware functions like pan, tilt, and focus, as well as
media fixture capabilities including loading images and movies. The graphics engine allows you manipulate
position, scale, rotation, apply visual effects and colour mix each image.
S-Video and VGA inputs for direct input to data projectors are handy for performing presentations.
S-Video and Composite live inputs can be used in graphics effects of DigitalSpot 7100 DT

4. Fixture exterior view

The fixture head is locked for transportation - the tilt lock button (11) is pushed and the pan lock/unlock latch (5) is
in a lock position. To unlock the fixture head, press the tilt unlock button (9) and move the pan lock/unlock letch
into an unlock position.
Front panel of fixture base
DigitalSpot 7100 DT
7
1 - Top head cover
2 - Projector aperture
3 - LED Wash module
4 - Yoke
5 - Pan lock/unlock latch
6 - Control board
7 - Base
8 - Handle
9 - Bottom head cover
10 - Tilt unlock button (green)
11 - Tilt lock button (red)
1 - Display
2 - Rotary control wheel
3 - Escape button
4 - Enter button