15. Disassembly and Assembly Instructions
High Voltage is generated in the electrical parts area by the capacitor. Ensure that the capacitor has discharged sufficiently before proceeding with
repair work. Failure to heed this caution may result in electric shocks.
15.1 CS-S9NK CS-S12NK
15.1.1
Indoor Electronic Controllers, Cross Flow Fan and Indoor Fan Motor Removal
Procedures
15.1.1.1
To remove front grille
2.
Remove 2 caps and 2 screws at the
bottom of discharge vane.
15.1.1.2
To remove power electronic controller
WARNING
Figure 1
2 Hooks (left hand side)
Figure 2
106
3.
Hold both sides of the front grille and
remove it by pulling up and toward
yourself gently.
1.
Lift to open the horizontal vane
gently.
4.
Remove the control
board cover by
releasing the 2 hooks.