Getting Started
Before you get started using your notebook, first take a few moments to read the
important section on Safety. This notebook comes with software fully pre-installed. You
do not have to install software from any of the discs supplied.
How to Start:
Step 1
► Insert the battery before bringing the notebook into operation by sliding the
battery pack into the compartment. The battery should remain locked in order to
avoid it falling out.
► Connect the supplied power adapter to the notebook at the notebook power
socket (9). Connect the power adapter via a power cord to a free AC power
outlet. Set the switch on the power adapter to the I setting, in order to supply the
notebook with electricity and to charge the battery.
(Set the switch to 0 to interrupt the electricity supply.).
After Sales Support
TEL: 1300 884 987
WEB Support: www.medion.com.au
23