Connecting; Power Supply - Medion AKOYA E7222 Instruction Manual

Connecting

Pay attention to the following information in order to connect your notebook correctly:

Power Supply


The electric outlet must be in the vicinity of the notebook and within reach of the
power adapter cords.

To disconnect your notebook from the power source, or set the notebook to battery
operation, remove the power cord from the notebook's power socket.

Only use the notebook with a power adapter operating at AC 110-240V~/50-60 Hz.
For details on power consumption, please refer to the rating plate on the rear of your
notebook. If you are unsure of the type of power supply available at the point of use,
ask your local power company.

Use only the supplied power cord and power adapter.

To provide additional protection against electric shock, power surges, lightning
strikes, or other electrical damage to your notebook, we recommend the use of a
surge protector.

To detach the power adapter from the mains power supply remove the plug from the
power source first and then remove the connector from the notebook. A reverse
sequence could damage the power adapter or the notebook. Always hold the
connector firmly when removing it. Never pull on the power cord.
After Sales Support
DANGER !
Do not open the power adapter housing. When
the housing is open there is a danger of severe
electric shock. There is a risk of electric shock.
It contains no user-serviceable parts.
TEL: 1300 884 987 WEB Support: www.medion.com.au
15