Fault Condition - Worcester GREENSTAR CDi CLASSIC REGULAR ErP User Instructions

3.5

FAULT CONDITION

In the event of a fault occurring while the boiler is in operation
the reset button and the main fault indicator [5] will flash.
The display [1] will show an error code (for error codes see
table 4 on page 11)
3 4
5
2
1 6
max
Fig. 5
To reset the boiler:
▶ Press the reset button [2] for three seconds.
The reset button [2] and the ON/OFF indicator [5] will stop
flashing.
The boiler will function normally, dependent on
programmer and room thermostat settings.
If the fault cannot be cleared by pressing the
reset button:
▶ Refer to the fault finding section on page
10 of these user instructions.
▶ Call Worcester, Bosch Group, giving a
description of the fault and, if possible,
the fault code from the seven segment
display. Alternatively contact other Gas
Safe registered personnel for
assistance.
GREENSTAR CDi CLASSIC REGULAR
1
reset
2
eco
5
6720806549-04.1Wo
ErP
– 6 720 815 726 (2015/05)
.
Operating the boiler
9