Priority A Channel Selection; Man Down Emergency Call; Stun Function; Scrambler Function - Icom iC-F3033S Instruction Manual

3
BASIC OPERATION

Priority A channel selection

Depending on the presetting, the Priority A channel is se-
lected each time the transceiver power is turned ON.

Man Down Emergency Call

This function requires the optional UT-124R
When the transceiver has been left in a horizontal position for
the specified time period*, the transceiver enters the emer-
gency mode, and then the countdown starts.
After the specified time period* has passed, an emergency
call is automatically transmitted once, or repeatedly.
If the transceiver is placed in a vertical position before the first
transmission, the transceiver exits the emergency mode and
the emergency call is cancelled.
IMPORTANT: It is recommended to set an emergency
channel individually to provide the certain emergency call
operation.
* Depending on the presetting. Ask your dealer for details.
13

Stun function

When the specified ID, set as a stun ID or kill ID, is received,
the stun function is activated.
When the stun ID is received, the transceiver becomes unus-
able. Entering of the password (p. 8) or receiving a specified
ID, set as a revive ID, is necessary to operate the transceiver
again in this case.
When the kill ID is received, the transceiver switches to the
.
MAN DOWN UNIT
cloning required condition. Cloning the transceiver is neces-
sary to operate the transceiver again in this case.
Stun function is also available with the MDC 1200 signaling
system. (p. 14)

Scrambler function

The voice scrambler function provides private communica-
tion between stations. The optional Rolling or Non-rolling
type can be available.
Push [Scrambler] to turn the scrambler function ON.
q
w Push [Scrambler] again to turn the scrambler function
OFF.
" appears.
" disappears.