Auto Seq Menu - Night Owl X Series 16CH User Manual

Chapter 14: Basic Menu

14.3.2 Auto SEQ Menu

Use the Auto SEQ Menu to adjust the channels and time that will be
displayed when you start the auto sequence.
To access the Auto SEQ Menu, select the Basic button, select Display
from the list on the left side of the screen, and then select Auto SEQ.
•
Auto Sequence: Allows you to choose between Stencil 1x1,
Stencil 2x2, and Custom. Stencil 1x1 and Stencil 2x2 show each
channel in numeric order, one by one. Custom allows you to
change the sequence in which the channels are displayed.
•
Sequence: Indicates the order the channels will be shown.
•
Mode: Indicates the view of the sequence (e.g., Stencil 1x1).
•
CH: Indicates the channel that will be viewed for sequence.
•
Dwell: Indicates how long the channel will be displayed before it
switches to the next sequence.
•
Copy: This option will only be available if you have chosen Custom
under Auto Sequence. Allows you to copy Stencil 1x1 to all.
•
To Custom: Select this button to copy Stencil 1x1 to all channels.
38