Table of Contents
Advertisement
10. IMPORTANT: See page 14 and plug in the
power cord. Next, see page 16 and turn on
the power.
Then, press the 0 percent Incline button.
When the frame stops moving, remove the
key from the console and unplug the power
cord.
11. Raise the Frame (56) to the position shown.
Have a second person hold the Frame until
this step is completed.
Orient the Storage Latch (53) so that the large
barrel and the latch knob are oriented as shown.
Attach the upper end of the Storage Latch (53)
to the bracket on the Frame (56) with a 3/8" x
1 3/4" Bolt (6) and a 3/8" Nut (11).
Attach the lower end of the Storage Latch (53) to
the Base (97) with a 3/8" x 2" Bolt (3) and a 3/8"
Nut (11). Note: It may be necessary to move the
Frame (56) back and forth to align the Storage
Latch with the Base.
10
11
56
11
Latch
Knob
Large
Barrel
97
11
IMPORTANT:
Make sure to follow all
instructions in this step.
6
53
11
3
Advertisement
Table of Contents
