Table of Contents
Advertisement
i-Manual
Basic Operations
Parts Description
Watching TV
Using Other Devices
Using "BRAVIA" Sync
Devices
Useful Functions
Using Internet
Using Home Network
(DLNA)
Configuring Various
Settings
Troubleshooting
How to Use Bookmarks
Rear
LAN
Connects to an existing network using an Ethernet cable.
RF input that connects to your cable or antenna.
DIGITAL AUDIO OUT (OPTICAL)
You can listen to TV sound on a connected home theater system with digital
input.
/
VIDEO IN 1
Connect with a composite video cable. When connecting mono device, connect
to the L (MONO) audio jack.
/
COMPONENT IN, VIDEO IN 2
This input can be used as a composite video input or as a component video
input. When connecting mono device, connect to the L (MONO) audio jack.
For composite use, connect to VIDEO IN 2 for video, and to AUDIO (L/R) of
COMPONENT IN for audio signals.
For component connection, use Y, PB, PR for video signals and also connect to
AUDIO (L/R) for audio signals.
The TV will automatically detect and switch between VIDEO IN 2 and
COMPONENT IN. To manually set the input type, press the HOME button, select
[Settings] →
[Channels & Inputs]/[Channels, Inputs & Ginga] → [Video
2/Component Selection].
HDMI IN 1/2
HDMI (High-Definition Multimedia Interface) provides an uncompressed, all-
digital audio/video interface between this TV and any HDMI-equipped audio/video
device. In addition, when you connect device that is compatible with "Control for
HDMI", communication with the connected device is supported.
Be sure to use only an authorized HDMI cable bearing the HDMI logo.
If connecting a digital audio system that is compatible with Audio Return Channel
(ARC) technology, use HDMI IN 1. If not, an additional connection with DIGITAL
AUDIO OUT (OPTICAL) is necessary.
If the device has a DVI jack, connect it to HDMI IN 2 through a DVI - HDMI
36
Print
Font Size
Top Page
>
Parts Description
> Rear
/
/
Advertisement
Table of Contents
