Table of Contents
Advertisement
Charging a Spare Battery
The base can also charge a second battery while the terminal is positioned in the base. The second
battery can be inserted in the battery charging well in back of the terminal connection. Place the battery
in the well with the label facing up and toward the back of the unit. Angle the battery as shown. Once the
connectors engage, the LED lights. If the LED is red, the unit is charging; if it is green, the charge is
complete.
Charging LED
Checking Battery Power
To check battery power while the terminal is operating, tap Start > Settings > Control Panel > Power .
8-6
Advertisement
Table of Contents
