Table of Contents
Advertisement
Display Backlight
The intensity of the backlight of the touch screen display may be changed, and the backlight may be
programmed to turn off after the terminal has been idle for a specified period of time.
To adjust the intensity of the backlight while on battery power, tap Start > Settings > Control Panel >
double tap Backlight .
Screen Backlight - Battery/External Power
Move the slider to adjust the screen backlight while on battery power.
You may turn the screen backlight off if the device is not used for a
designated period of time by checking the option and designating the
desired time period.
You may also turn on the screen backlight when a button is pressed or the
screen is tapped by selecting the appropriate checkbox.
Note: Using the backlight option while on battery power substantially reduces
battery life.
You may make the same changes when on external power by tapping the
External tab.
Keyboard Backlight
To turn on the keypad backlight, check the checkbox.
The duration of backlight of keypad synchronizes with LCD backlight's.
Using Screen Protectors
Honeywell defines proper use of the terminal touch panel display as using a
screen protector and proper stylus. Screen protectors maintain the ongoing
integrity (i.e., prevent scratching) of the touch panel, which is why their use is
recommended for applications that require a high to medium level of interface
with the touch panel.
Honeywell continues to advocate the use of screen protectors on all Dolphin
terminals. We recommend implementing a screen protector replacement program to ensure that screen
protectors are replaced periodically when signs of damage/wear are noticeable. For general use, we
recommend replacing the screen protector every thirty (30) days. However, replacement cycles vary
according to the average level of touch panel use in your application.
3-3
Advertisement
Table of Contents
