Bosch Rexroth CS550 Installation Manual page 6

The following is a detailed navigation chart for the system layout. See Appendix for the
detailed system layout including all the components and part numbers.
CS-550 / 150 ELECTRONIC SYSTEM BUILDER
TABLE OF CONTENTS
ITEM DESCRIPTION
550 SPREADER
1 SPREADER PACKAGES
2 MAIN HARNESS
3 CANBUS CABLES
4 SENSOR EXTENSIONS
5 SENSOR NETWORK
6 VEHICLE SPEED
7 VALVE EXTENSIONS
8 550 AUXILIARY CABLE
9 VALVE ADAPTER
150 ARMREST
1 RCE CABLES
2 POWER FLOAT
3 150 AUXILIARY
4 CANBUS CABLE
5 LOW OIL, SPIN. REV.
SPECIAL FUNCTIONS
1 PRESSURE/TEMP/CHUTE
2 ROAD TEMP
3 WIFI
4 GPS PUCK
5 ANTI-ICE
TOW PLOW
1 TP SPREADER PKG
2 MAIN HARNESS
3 CANBUS SPLITTER
4 SENSOR EXTENSIONS
5 SENSOR NETWORK
6 VALVE EXTENSIONS
COORDINATES
X.Y DETAILS
E1 DISPLAY AND RC INCLUDED
D7 ADVANCED OR LITE
C2
B6
C6 PULL-UP RESISTOR (WHITE MOTOR)
B7
E6 IF RC LOCATED IN CAB
E3 MATERIAL DETECT / CHANGE
E6 (C4M TO ITT) FOR OLD SCB/MP18
A3 IN-VALVE OR IN-CAB
C4 NO ADAPTERS FOR NEW C4 BLOCK
B2
C2
C3 ADAPTERS REQUIRED
D3 HYDRAULIC MONITORING
D0 ROAD AND AMBIENT TEMP
D2 NEED EXTENSION?
E0
E4 USE C4-C4 EXTENSIONS (CUT END)
E1 INCLUDES TWO 4-4's
D9
D6
B6 RC ON TRUCK OR TRAILER?
C6 IF PULL-UP RESISTORS REQUIRED
E6 RC ON TRUCK OR TRAILER?
Bosch Rexroth Canada ı May 2019 ı Revision 5.0
6/20