Heat Diffusers
11
Place heat diffusers over burners by inserting tabs into slots in front of firebox.
Opposite ends of heat diffusers rest on pins in back of firebox.
Cooking Grate and Swing Away
12
Place cooking grates onto grate rests.
Insert ends of Swing Away pivot wire into holes in sides of grill lid. Insert ends of Swing Away leg wire into holes in sides of firebox.
NOTE: Pivot and leg wires, running side-to-side, should be under wires running front-to-back. If pivot and leg wires are on top,
Swing Away is installed upside-down.
Unscrew ignitor cap and place AA battery into ignitor slot with positive end (+) facing outward. Screw ignitor cap onto ignitor.
Pivot Wire
Swing Away
Leg Wire
+
–
Pin
Cooking Grate
AA Battery
464323510 21
•