Getting Started
When you turn the TV on for the first time, a sequence of on-screen prompts will assist in configuring basic settings. To turn on
the TV, press the POWERP button.
✎
Plug & Play is available only when the Source List is set to TV.
✎
Before turning on the TV, make you have connected the TV to an antenna or cable connection (p. 14).
1
Selecting a language
2
Selecting Store Demo
or Home Use
3
Selecting search
options for auto tuning
4
Setting the Clock
Mode
5
View the HDTV
Connection Guide
6
Enjoy the TV.
If You Want to Rerun Plug & Play...
MENUm → Setup → Plug & Play → ENTERE
Plug & Play (Initial Setup)
Press the ▲ or ▼ button, then press the ENTERE button. Select the
desired OSD (On Screen Display) language.
Press the ◄ or ► button, then press the ENTERE button.
y Select the Home Use mode. Store Demo Mode is for retail
environments.
y To return the unit's settings from Store Demo to Home Use:
Press TV controller on the TV to open function OSD, then select
SOURCEs by moving TV controller to right direction, press and
hold for 5 seconds.
Press the ▲ or ▼ button, then press the ENTERE button. Select Air, Cable or Auto.
✎
If you selected Cable, you'll go to the cable system screen. Use the u or d button
to select the correct cable signal format - STD, HRC, or IRC - and then press
ENTERE. Most cable systems use STD. Select the correct cable signal format for
both the Digital and Analog systems.
✎
When done, select Start, and press the ENTERE button.
Set the Clock Mode automatically or manually.
y Auto: Allows you to select DST (Daylight Saving Time) mode and time zone.
y Manual: Allows you to manually set the current date and time (p. 26).
The connection method for the best HD screen quality is displayed.
Press the ENTERE button.
POWER
P
15
English
INF