Connecting To An Antenna; Plug & Play (Initial Setup) - Samsung ln40c550 User Manual

Connecting to an Antenna
When the TV is initially powered on, basic settings proceed automatically.
~ Connecting the power cord and antenna.
Cable
VHF/UHF Antenna
~
~
Power Input
Plug & Play (Initial Setup)
When the TV is initially powered on, a sequence of on-screen prompts will assist in configuring basic settings. Press the
POWERC)
button.
Plug
&
Play
is available only when the
Input
source is set to TV.
~ To return to the previous step, press the red button.
Press the
ENTER
13' button.
POWER
~
1
2
3
4
5
Selecting a language
Selecting Store Demo
or Home Use
Selecting an antenna
Selecting a channel
Setting the
Clock
Mode
Viewing the
HD
Connection Guide.
Enjoy your lV.
Press the ENTER
13'
button.
Press the
A
or
T
button, then select the desired OSD (On Screen
Display) language.
Press the
~
or
~
button, then press the ENTER
[3J
button.
• Select the Home Use mode. Store Demo Mode is for retail
environments.
• To return the unit's settings from
Store Demo
to
Home Use
(standard): Press the volume button on the TV. When you see the
volume in the OSD, press and hold
MENU
for 5 sec.
Press the A or T button, then press the ENTER
[3J
button. Select Air, Cable or Auto.
~ In Cable mode, you can select the correct signal source among STD, HRC, and IRC
by pressing the A,
T,
~
or
~
button, then press the ENTER
13'
button.
The channel search will start automatically.
For more information, refer to Channel
-+
Auto Program. (P. 12)
~ Press the ENTER
13' button at any time to interrupt the memorization process.
Set the
Clock Mode
automatically or manually.
~ If you select the Auto, set the daylight saving time.
Select the time zone where you live.
The connection method for the best HD screen quality is displayed.
If You Want to Reset This Feature...
(SJ
MENU []]]
-+
Setup
-+
Plug & Play
-+
ENTER
13'
Menu Language
Caption
Security
Network
: English
: On
: Off
English
7