Connecting To An Antenna; Plug & Play (Initial Setup) - Samsung 4 SERIES User Manual

When the TV is initially powered on, basic settings proceed automatically.
✎
Connecting the power cord and antenna.
Cable
ANT OUT
VHF/UHF Antenna
When the TV is initially powered on, a sequence of on-screen prompts will assist in configuring basic settings. Press the
POWERP button. Plug & Play is available only when the Source is set to TV.
✎
To return to the previous step, press the Red button.
1
Selecting Language of
the OSD
2
Selecting the usage
mode
3
Setting the Clock
Mode
4
Selecting search
options for auto tuning
5
Selecting a channel
6
Enjoy your TV.
If You Want to Reset This Feature...
O
MENUm → System → Plug & Play → ENTERE
Enter your 4 digit PIN number. The default PIN number is "0-0-0-0." If you want to change the PIN number, use the Change PIN function.
You should do Plug & Play (MENU

Connecting to an Antenna

or
Antenna Cable (Not Supplied)
Plug & Play (Initial Setup)
Press the ▲ or ▼ button, then press the ENTERE button. Select the
desired OSD (On Screen Display) language.
Press the ◄ or ► button, then press the ENTERE button.
Select the Home Use mode. Store Demo Mode is for retail environments.
y
To return the unit's settings from Store Demo to Home Use (standard):
y
Press the volume button on the TV. When you see the volume in the OSD,
press and hold MENU for 5 sec.
Set the Clock Mode automatically or manually.
✎
If you select the Auto, select the time zone where you live.
Press the ▲ or ▼ button, then press the ENTERE button. Select Air or Cable.
The channel search will start automatically.
For more information, refer to Channel → Auto Program.
✎
Press the ENTERE button at any time to interrupt the memorization process.
Press the ENTERE button.
-> System) again at home although you did in shop.
English - 5
TV Rear
POWER
P
SLEEP
FAV.CH
S.MODE