Samsung TC570 User Manual page 24

Basic Features
✎
NOTE
x
After selecting Zoom1, Zoom2 or Wide Fit:
1. Press the ► button to select Position.
2. Press the ENTERE button.
3. Press the ▲ or ▼ button to move the picture up
or down.
4. Press the ENTERE button.
✎
If you want to reset the pictures to its original
position, select Reset, and then press
ENTERE. The picture will be reset to its
default position.
x
After selecting Screen Fit in HDMI (1080i/1080p) or
Component (1080i/1080p) mode, you may need to
center the picture:
1. Press the ◄ or ► button to select Position.
2. Press the ENTERE button.
3. Press the ▲, ▼, ◄ or ► button to move the
picture.
4. Press the ENTERE button.
✎
If you want to reset the pictures to its original
position, select Reset, and then press
ENTERE. The picture will be reset to its
default position.
x
HD (High Definition): 16:9 - 1080i/1080p (1920x1080),
720p (1280x720)
x
Settings can be adjusted and stored for each
external device you have connected to an input on
the TV.
Input Source
ATV, AV,
Component (480i, 480p)
DTV(1080i),
Component (1080i, 1080p),
HDMI (720p, 1080i, 1080p)
Picture Size
16:9, Zoom1,
Zoom2, 4:3
16:9, 4:3, Wide Fit,
Screen Fit
Maintaining the Correct Posture when Using this Product
Maintain the correct posture when using this product.
y Straighten your back.
y Keep a distance of 45~50 cm (15~19 inches) from your
eyes to the screen. Look down at the screen and face
the screen forwards.
y Adjust the angle of the product so that light is not
reflected onto the screen.
y Keep your elbow at a right angle and keep your arm
level with the back of your hand.
y Keep your elbow at a right angle.
y Place your heels flat on the ground while keeping your
knees at an angle of 90 degrees or higher and maintain
the position of your arm so that your arm is below your
heart.
■ Digital Clean View: If the broadcast signal received
by your TV is weak, you can activate the Digital Clean
View feature to reduce any static and ghosting that may
appear on the screen.
✎
When the signal is weak, try other options until the
best picture is displayed.
■ MPEG Noise Filter: Reduces MPEG noise and
improves the video quality.
■ HDMI Black Level: Lets you select the black level on
the screen to adjust the screen depth.
✎
Available only in HDMI mode (RGB signal).
■ Film Mode: Sets the TV to automatically sense and
process film signals from all sources and adjusts the
picture for optimum quality.
✎
Available in TV, AV, COMPONENT (480i / 1080i)
and HDMI (1080i).
Picture Reset (Reset Picture Mode /
Cancel)
Resets your current picture mode to its default settings.
24
English