Cnx™ Wireless System - Fluke Ti90 User Manual

CNX™ Wireless System
The Imager supports the Fluke CNX™ Wireless System (may not be available
in all regions). It can discover up to 10 3000 Series wireless tools up to 20
meters away. From those 10, you can select 5 tools to view their live
measurements on the Imager display.
To discover a supported tool:
1. If not already on, turn on each wireless tool and make sure the wireless
feature is enabled. See the documentation of each tool for more
information about how to use.
2. Turn on the Imager.
3. Push .
4. Push / to highlight Camera.
5. Push  or  to view the menu.
6. Push / to highlight CNX.
7. Push  or  to view the menu.
8. Push / to highlight ON.
9. Push  or  start the discovery process.
When done, the Imager presents a list with the ID and name of available
tools found within the 20 m distance.
10. Push / to highlight a tool name.
11. Push  to select the tool.
12. Repeat steps 10 and 11 for each tool to show on the display.
13. Push  when done.
The labels change to include an Edit function. By default, the Imager
shows and saves the data for the selected tools. If these settings are
acceptable, push  to exit the CNX setup menu.
Shop for Fluke products online at:
Performance Series Thermal Imagers
MyFlukeStore
www.
1.877.766.5412
.com
Menus
47