Image Capture; Ir-Photonotes - Fluke Ti90 User Manual

Performance Series Thermal Imagers

Image Capture

Image Capture
Point the imager at the object or area of interest. Make sure that the object is in
focus. Pull and release the primary trigger. This will capture and freeze the
image. To cancel the captured image, pull the primary trigger again or 
to return to the Live view.
Depending on the selected file format settings, the Imager shows the captured
image and a menu bar. The menu bar lets you save the image, edit some
image settings, and add voice annotation or IR-PhotoNotes. To change the file
format, see File Format on page 50.

IR-PhotoNotes™

IR-PhotoNotes™ are photograph annotations that allow the user to capture and
add multiple visible images of various objects, text, or other information that is
related to the analysis and reporting of an infrared image. Examples of an
annotation include motor name plates, printed information or warning signs,
larger views of the environment or room, and related equipment. Up to three
images can be captured with the visible image that is stored with the infrared
image as part of IR-Fusion technology. These visible images are only available
in the .is2 file format and are stored in the file so you do not need to collate
multiple files at a later time.
To add IR-PhotoNotes:
1. With an image in the buffer, push  to open the EDIT IMAGE menu.
2. Push / to highlight IR-PhotoNotes.
3. Push  to enter the Picture mode.
4. Focus Imager on the object and pull the primary trigger.
5. Push  to continue.
6. Push  save the picture with the image.
MyFlukeStore
1.877.766.5412
www. .com
Shop for Fluke products online at:
17