Philips 40PFL9704H/12 Service Manual page 48

Hide thumbs Also See for 40PFL9704H/12:
Table of Contents

Advertisement

EN 48
7.
Q549.3E LA
7.6
Common Interface CI+
Together with this platform, an extension to the Common
Interface (CI) Conditional Access system is added, called CI+.
CI+ or Common Interface Plus is a specification that extends
the Common Interface (DVB-CI) as described in the digital
broadcasting standard DVB.
The weakness of the conventional CI module as Conditional
Access system was the absence of a Copy Protection
mechanism, as decrypted content could be sent over the
PCMCIA interface unscrambled. With the CI+ extension, a
form of copy protection is established between the Conditional
tuner
T ransport stream
7.7
Net TV
In this chassis, a feature that enables access to dedicated
internet pages from a limited group of information suppliers,
7.8
Ambi Light
The Ambi Light architecture in this platform has been entirely
renewed. The characteristics are:
Additional DC/DC board generating 12/16/24 V (optional)
ARM processor (on DC/DC panel or AL board)
Low-power LEDs
SPI interface from ARM to LED drivers
2
I
C upgradeable via USB
Each AL module has a temperature sensor.
2009-Aug-07
Circuit Descriptions
channel
TS -IN P U T
decoder
interface
(S C )
Figure 7-11 CI+ Conditional Access implementation
Access Module (CAM) and the Integrated Digital Television
(IDTV). The security mechanisms in CI+ are derived/copied
from POD (with the exception of Out Of Band (OOB) used in
US CA systems). For more information about conventional CA
systems using a CI module, refer to the BJ3.0E L/PA or BL2.xU
Service Manual.
The CI+ standard is downwards compatible with the existing CI
standard.
The following figure shows the implementation of the CI+
Conditional Access system in the TV543 platform.
D E S /AE S
d eco d er
d em u x
d escram b ler
M H E G C I+
P N X 8543
C om m and
interface
C A M
called "Net TV", is introduced. A separate Wi-Fi module
enables wireless communication with a local network.
The use of the DC/DC board is optional. In case no DC/DC
board is implemented, the ARM processor is located on one of
the AL boards.
Refer to
Figure 7-12
M atrix
M atrix
Tran sp o rt S tream s
C A-C o n tro l
P ro p rietary C A
scram b ling
C I + S tan d ard ised C C S
scram b ling
18440_221_090227.eps
090227
for the Ambi Light architecture.

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

40pfl9704h/6046pfl9704h/1246pfl9704h/6052pfl9704h/12

Table of Contents