Mechanical Characteristics - IVIEW 3960 Series Instalation And Operation Manual

3960 CAMERA
Pan/Tilt Driver
Angular Travel
P/T Speed (preset)
Pan Speed (manual)
Tilt Speed (manual)
Preset Accuracy
Power Input
Power Consumption
Power Transient Interruptions
Weight
Environmental
Presets
Title Generation
Tours
Sectors
Privacy Zones
Cloning
Inverted Operation
Vibration (less lens)
Shock
Air Contaminants
Acoustical Noise
EMI
available protocols are listed in the Protocol Options
section of the Model Index shown in figure 2. Some
of these protocols may not support all functions of
the 3960.

1.2 Mechanical Characteristics

Dimensions are shown in figure 8. The 3960
consists of a sealed, pressurized camera module
4
Table 1. Specifications
SYSTEM RELATED
360° continuous pan range; -90 to +90 tilt range
160° / sec
0.1° to 80° sec
0.1° to 40° sec
>0.1°
89 V ac to 135 V ac; 120 V ac nominal, 60 Hz; per NEMA 2.1.2 Std TS2 for
traffic control systems
24 V ac optional
70 W max with heaters
NEMA 2.1.6 TS2
15 pounds (7 kg)
-34° to 74° C (-29° to 165° F);
Conforms to NEMA 2.1.5.1 Standard TS2 for traffic control systems
64 preset positions
2 lines of 24 characters each for camera ID;
Preset ID, sector ID, privacy zone;
Low pressure alarm, temperature readout, pressure readout
8, each consisting of 32 presets with dwell time per preset per tour
16 in the horizontal plane
8 programmable zones can be set for video blanking
Positioner settings (presets, titles, etc.) can be stored to file for easy duplication
Can be mounted in an inverted position; software compensates for inversion
Sine vibration from 5 to 30 Hz, 1/2 g, 3 axis one hour
Up to 10 g's, 11 ms, in any axis under nonoperating conditions
Withstands exposure to sand, dust, fungus, and salt atmospheres per MIL-E-
5400T, paragraph 3.2.24.7, 3.2.24,8, and 3.2.24.9
Can withstand environments >150 dB continuously to 30 minutes
FCC rules, part 15, subpart J, for class A devices
INSTALLATION AND OPERATION
mounted together with a high performance
positioner (pan/tilt unit) that is sealed from rain,
dust, dirt, and other undesirable contaminants. The
pan/tilt assembly is environmentally sealed but not
pressurized.
The moulded housing provides an integral sun
shield over the camera module housing to prevent
heat build up that could result from direct sun light
on the camera module housing.
6X-1050a