Cleaning The Exterior; Troubleshooting; Paper Loading Problems - Intermec 680X Reference Manual

Maintenance and Troubleshooting
5. Remove the Cleaning Card and throw it away.
WARNING: Do not attempt to clean the internal areas of the printer in any
other way than that described above! This could result in
damage to the print head and void your warranty

Cleaning the Exterior

When the outside of your portable printer needs cleaning,
use a soft cloth and mild cleanser if necessary. Do not use
abrasive cleanser, chemicals or scrubbing pads, as your
printer 's finish could become marked.

Troubleshooting

Paper Loading Problems

If the paper feed mechanism does not feed correctly on the
first part of a new paper roll, remove two to three feet of
paper from the outside of the roll. The length of paper rolls
can vary by as much as five feet, making the roll too thick
in diameter for the printer to accommodate.
If the printer is out of paper (or the paper release lever is
disengaged) this condition will interrupt a batch of receipts,
and the printer will suspend operation until the condition is
cleared. The printer will continue to communicate with the
hand held as long as it does not "time out."
Once the printer is operational, the suspended print batch
(if any) will continue to print, insuring that all receipts are
properly printed.
5-2 Intermec Portable Printers Technical Reference Manual
SECTION 5