Printer Self-Test; 700 Mobile Computer Preparation - Intermec 680X Reference Manual

781T Printer using Wireless Printing

Printer Self-Test

1. Press the Paper Advance (red) button for at least five
2. When shipping your printer via air freight, turn the

700 Mobile Computer Preparation

1. On your mobile computer, tap the Bluetootht t t t icon
2. Select Advanced Features>Bluetooth Devices.
3. From the Tools menu, select Device Discovery. You
4. You are now presented with a screen allowing you to
5. Click Next to proceed. A search for Bluetooth devices
6. A list of discovered devices displays.
If your remote wireless printer is discovered and presented
in the list, select the appropriate check box and click
Next.
If your remote device is not displayed, ensure that the de-
vice and its radio are switched ON. Click Next, then select
Finish.
7. A progress bar appears indicating Service Directory is
3-6 Intermec Portable Printers Technical Reference Manual
seconds to run a Self-Test. This means you will be
holding it long enough to hear the beep and complete a
paper advance. The self-test indicates the current
state of your printer. Verify the current mode by read-
ing the Power status line from the printout. When
your printer is turned off, the radio is undiscoverable
and unconnectable.
wireless printing mode off and set to IrDA so that the
radio is not powered
located in the System tray on the Today screen.
are presented with a couple of screens detailing the
device discovery process.
modify the selection parameters. The default should
work for your needs.
is performed followed by a look-up of discovered device
names. The progress bars indicate the inquiry status.
being performed.
SECTION 3