Battery Charging Indicator; Customer Receipts And Labels; Table 4-1 Battery Charging Descriptions - Intermec 680X Reference Manual

Operation
2. Insert the new battery in by putting the non contact
3. Push down on the battery near the battery lock tabs.
4. Charge the new battery.

Battery Charging Indicator

Battery LED
Solid Red
Green
Red Flash Slow
Red Flash Fast
Red/Orange Slow
Red/Orange Fast
Orange Flash Slow
Orange Flash Fast

Customer Receipts and Labels

This chapter is designed to be used by programmers, soft-
ware engineers, and technicians. It assumes a basic knowl-
edge of computer programming.
The 680x series of printers can operate in Line Printer
Mode or Easy Print Mode. Both modes are used to print
receipts, labels, tickets and reports. The mode you choose
will depend on the sophistication of your receipt and label
requirements, and on a variety of other factors discussed
below.
4-12 Intermec Portable Printers Technical Reference Manual
area of the battery in first towards the center.
Table 4-1
Battery Charging Descriptions
State of Charge
Charging in Progress
Charge Completed
Low Temperature or Battery is disconnected
High Temperature
Low Voltage
High Voltage
Time out
Internal Error
SECTION 4