Intermec 680X Reference Manual page 45

781T Printer using Wireless Printing
"
Build Information
In addition to Bluetooth Power status, the RF personal Net-
work section of the self-test ticket also contains Build Infor-
mation. This information is useful if you ever need to know
what particular version of Bluetooth firmware is in your
printer, whether that be for support or upgrade purposes.
Default Device Name
Your 781T printer comes from the factory with a "friendly"
name that reflects the serial number. if you have a 781T
with a serial number of 4321012, the Device Name will be
781T--4321012. this parameter is currently only configur-
able in the factory. If you would like the Device Name to fit
your particular naming convention, please discuss that with
your Intermec representative.
Default Device Class
Your 781T printer comes from the factory with a device
class of 'Peripheral'. This parameter is currently only confi-
gurable at the factory. If you would like the Device Class to
be something different, please discuss that with your Inter-
mec representative.
Default Service Class
Your 781T printer comes from the factory with a service
class of 'Rendering'. This parameter is currently only confi-
gurable at the factory. If you would like the Service Class to
be something different, please discuss that with your Inter-
mec representative.
Services Offered
Your 781T printer comes from the factory with one avail-
able service, Wireless Printer, Bluetooth "Serial Port" ser-
3-4 Intermec Portable Printers Technical Reference Manual
Bondable--If your device is Bondable, it can participate
in Bluetooth security requests. There are currently no
services available on the 700, therefore there is no
need to make it Bondable.
SECTION 3