Intermec 680X Reference Manual page 138

GLOSSARY
Dots
The unit of measure for each mark made on paper. There
are 203 dots per inch for the microFlash2/3/2t series of
printers (8dots/mm). For the microFlash2i there are 128
dots per inch horzontal and 64 dots per inch vertical.
Easy Print Mode
Easy Print is a programming method used to produce re-
ceipts and labels with complex or stored graphics. It allows
you to design a custom receipt, ticket or report with bor-
ders, lines, logos, bar codes, text and stored graphics in any
arrangement or rotation to suit your needs.
Field Option
An option used in Easy Print Mode that allows the user to
enlarge the size of a font, bar code or graphic.
Firmware Version
The version of the internal software that controls the micro-
Flash.
Flash Memory
Memory that is programmable and changeable. Flash
memory allows a user to upgrade a printer using a personal
computer, whenever it is necessary to change operating sys-
tem, fonts, graphics, or configurations. The user never has
to send the printer back to the factory for an update. The
printer never has to wait for a computer to send graphics,
since graphics are stored in flash memory.
Intermec Portable Printers Technical Reference Manual Glossary-3