Settings
Dialing mode
The default dialing mode is TONE for touch tone dialing. If you have pulse or
rotary service, you can change this setting to accommodate your telephone line
service.
1. Press menu.
2. Press
/
press ok.
3. Press
/
press ok.
4. Press
/
press ok to confirm.
Programming your area code (optional)
If you program your area code, the caller ID history displays only seven digits of
the telephone numbers from your area code.
To set the area code:
1. Press menu.
2. Press
/
3. Press
/
4. Enter your 3-digit area code and then press ok to
confirm.
Reset
This feature allows you to restore all system settings, except the phonebook, to
default settings.
1. Press menu.
2. Press
/
3. Press
/
4. Press ok again to confirm.
NOTE: All settings under the CLOCK&ALARM, HANDSET OPTS and SETTINGS
menus in the handset will be restored to default settings; the redial list and call
log will also be cleared.
to select SETTINGS and then
to select DIALING MODE and then
to select the desired setting and then
to select SETTINGS and then press ok.
to select AREA CODE and then press ok.
to select SETTINGS and then press ok.
to select RESET and then press ok.
8
SETTINGS
DIALING MODE
DIALING MODE
TONE
SETTINGS
AREA CODE
AREA CODE
_
SETTINGS
RESET
RESET
CONFIRM?