Chapter 10: Security Settings; Client Filter Settings - Tenda W302R User Manual

Wireless-N Broadband Router

Chapter 10: Security Settings

Client Filter Settings

To benefit your further management to the
computers in the LAN, you can control some ports
access to Internet by data packet filter function.
Client Filter: Check to enable client filter.
Access Policy: Select one number from the
drop-down menu.
Enable: Check to enable the access policy.
Clear the Policy: Click "Clear" button to clear all
settings for the policy.
Filter Mode: Click one radio button to enable or
disable to access the Internet.
Policy Name: Enter a name for the access policy
selected.
IP Start/End: Enter the starting/ending IP
address.
Port No.: Enter the port range based over the
protocol for access policy.
Protocol: Select one protocol (TCP/UDP/Both)
from the drop-down menu.
Times: Select the time range of client filter.
Days: Select the day(s) to run the access policy.
50