Tenda W302R User Manual page 37

Wireless-N Broadband Router
In this mode, you can expand the scope of
network by combining up to four other access
points together, and every access point can still
accept wireless clients.
Lazy Mode: You need configure the router's
BSSID into another device, not need input
another router's BSSID in it, and then connect
together automatically.
Bridge Mode: You can wirelessly connect two or
more wired networks via this mode. In this mode,
you need to add the Wireless MAC address of
the connecting device into the Router's AP MAC
address table or select one from the scanning
table. At the same time, the connecting device
should be in Lazy, Repeater or Bridge mode.
Repeater Mode: You can select the mode to
extend the distance between the two WLAN
devices. Functioning as a WDS repeater, the
W302R connects to both a client card as an AP
and to another AP. In typical repeater
applications, APs connecting to other APs
equipped with WDS functionality must also
support WDS. In this mode, you need to add the
MAC address of the connecting device into the
32