Sanyo VPC-T700EX Instruction Manual page 39

5. Select [Execute] with the
To not erase, select [Cancel], and press the SET button.
Deleting an image will not affect sequential image numbering. For example, if you
delete image number 240, the next captured image will be numbered 241 even though
240 no longer exists. In other words, an image-number is retired when an image is
deleted and will not be reused or reassigned to another subsequently captured image.
Erasing selected images
This erases a number of selected images.
1. Slide the mode switch to [
2. Press the button.
The deletion menu will be displayed.
3. Select [Select] with the
button.
The images are displayed in the thumbnail display.
4. Select the image you want to erase with the
buttons, and press the
The [ ] icon will be displayed. One more press of the
erase button will cancel the operation. Repeat this
procedure and select all the images that you want to erase.
5. Press the SET button.
/ buttons, and press the SET button.
].
/ buttons, and press the SET
/
button.
Delete
/ /
MENU:Exit
SET:Enter
100-0002 100-0010
EN-45