Defining Overlays - Oki B411 User Manual

3. When each overlay has been tested, click Exit.
4. Click the standard Windows Close (X) button, or
choose Projects > Exit to close Storage Device
Manager.

Defining overlays

This is the final step before the new overlays are ready for use.
1. Open the Printers (called "Printers and Faxes" in
Windows XP) window via the Start menu or the
Windows Control Panel.
2. Right-click on the Relevant PostScript printer icon and
choose Printing Preferences from the pop-up menu.
3. On the Overlay tab, click the New button.
4. In the Define Overlays window,
enter a suitable name (2) for this
overlay and choose which
page(s) (3) of your documents
will use this overlay.
5. Enter the name of the overlay
file (4) exactly as it appeared in
the Storage Device Manager
project window. Remember that
this name is case sensitive.
If you forgot to note the overlay names when you created
them, you can find them using Storage Device Manager
to view the project file, or the printer's Information Menu
to print a file list and identify them from there.
6. Click Add (5) to add this overlay into the defined
overlays list.
7. Click OK to close the Define Overlay window.
The new overlay now appears in the Defined Overlays list
in the printer properties window.
8. Repeat the above procedure if you wish to define more
overlays.
9. When done, click OK to close the printer properties
window.
89 > B411/B431 Overlays and Macros (Windows Only)
2
3
4
5