To the maximum extent permitted by applicable law, Fujitsu Microelectronics Europe GmbH restricts its warranties and its liability for the SK-96380-120PMC Board and all its deliverables (e.g. software include or header files, application examples, target boards, evaluation boards, engineering samples of IC’s etc.), its performance and any consequential damages, on the use of the Product in...
Chapter 1 Overview 1 Overview 1.1 Abstract The SK-96380-120PMC is a multifunctional evaluation board for the Fujitsu 16FX Flash microcontroller MB96380 Series. It can be used stand-alone for software development and testing or as a simple target board to work with the emulator system.
SK-96380-120PMC User Guide Chapter 1 Overview 1.2 Features < Supports Fujitsu’s 16FX MB96380 Series with 120 pin PMC / M21 package or the MB2198 Emulator System with the Probe Cable MB2198-16FX-120P-M21 < 9-15V unregulated external DC power supply < On-board 3.3V and 5.0V switching mode voltage regulators <...
SK-96380-120PMC User Guide Chapter 1 Overview 1.3 General Description The SK-96380-120PMC supports the F MC-16FX microcontrollers of MB96380 Series with LQFP120-M21 (PMC) package. It can be used as a stand-alone evaluation board or as a target board for the emulator debugger.
1. Power up the Emulator Main Unit (MB2198-01) 2. Power up the Adapter Board (MB2198-500), if needed 3. Power up the target Board (SK-96380-120PMC) To turn off the system, switch off the components in reverse order, beginning with the target Board.
Page 28
2) Connect the configured UART (see above) to your serial PC communication port. A straight 1:1 cable connection has to be used. 3) Start the tool “Fujitsu Flash MCU Programmer” software and make the settings: Set Device Type Select COM Port...
Need help?
Do you have a question about the SK-96380-120PMC and is the answer not in the manual?
Questions and answers