Page 1
T H E S O U N T H A T C R E A T E S L E G E N D S ‘63 Fender Reverb TYPE: PR 263 Owner s Manual P/N 047980...
Page 2
‘63 FENDER REVERB are built to the original specifications that are still in the Fender R&D department files. Due to the lack of availability, the original 6K6 power tube has been replaced with a modern 6V6. Some...
Page 3
Using your ‘63 Fender Reverb The ‘63 Fender Reverb is designed to go between a low level instrument (such as a guitar) and a high input impedance amplifier (such as any Fender tube amplifier or the high sensitivity input on any Fender solid-state amplifier).
Page 4
-Does the guitar and amplifier work properly without the Reverb Unit? (If so, then eliminate all other effects and try different guitar cords.) -If, after checking all the above, the system is still not operating properly, consult your authorized Fender Service Dealer. ‘63 Fender Reverb specifications Part Number:...
Need help?
Do you have a question about the 63 Reverb and is the answer not in the manual?
Questions and answers