Edimax AR-7265WnA User Manual page 35

Parameter
MBS
Encapsulation
The router can be connected to your service provider in any of the following ways.
Parameter
Dynamic IP Address
Static IP Address
PPPoE/PPPoA
Bridge Mode
Dynamic IP Address/Static IP Address/PPPoE/PPPoA/Bridge Mode
After you have selected the ISP Type, this web page will be varied depending on
the ISP Type you select. You have to continue setting some parameters. Please
refer to the following table for the explanation of each parameter.
Parameter
User Name
Password
Encapsulation
Description
MBS (Maximum Burst Size) refers to the maximum
number of cells that can be sent at the peak rate. Type
the MBS, which is less than 65535.
Description
Obtain an IP address automatically from your service
provider.
Uses a static IP address. Your service provider gives a
static IP address to access Internet services.
PPPoE (PPP over Ethernet) and PPPoA (PPP over
ATM) are common connection methods used for xDSL.
Bridge Mode is a common connection method used for
xDSL modem.
Description
Enter the username exactly as your ISP assigned.
Enter the password that your ISP has assigned to you.
Please check with your ISP the method of multiplexing.
In Bridge Mode, please select "1483 Bridge IP LLC" or
"1483 Bridge IP VC-Mux". In PPPoE/PPPoA mode,
27