Adjusting Focus Manually - JVC GZ-E105 User Manual

Adjusting Focus Manually

Set this when the focus is not clear in Intelligent Auto or when manual
focusing is desired.
Memo :
To select/move cursor towards up/left or down/right, press the button UP/<
or DOWN/>.
1
Select the Manual recording mode.
If the mode is P Intelligent Auto, press the i.AUTO 2 times to switch.
0
The mode changes between Intelligent Auto and Manual with every
press.
2
Press MENU.
3
Select "MANUAL SETTING" and press OK.
4
Select "FOCUS" and press OK.
5
Select "MANUAL" and press OK.
6
Adjust the focus with the UP/< and DOWN/> buttons.
Press UP/< to focus on a distant subject.
0
If E appears blinking, focus cannot be set any further.
Press DOWN/> to focus on a near subject.
0
If p appears blinking, focus cannot be set any nearer.
7
Press OK to confirm.
When focus is confirmed, the focusing frame disappears and E and
0
p are displayed.
Memo :
A subject that is focused at the telephoto (T) end remains in focus when
0
it is zoomed out to the wide angle (W) end.
"FOCUS" cannot be set during "TIME-LAPSE RECORDING".
0
Recording
25