Amana MV-194S Owner's Manual page 15

STEP 3: PREPARE THE VENTING BLOWER
blower unit
ROOM-VENTED (Recirculating)
INSTALLATION:
1. Remove one blower unit mounting screw and two blower
plate screws. Remove the blower plate from cabinet. See
Figure 17.
2. Carefully lift the blower unit out of the microwave oven.
3. Rotate blower unit so that the exhaust ports face the front of
the cabinet. See Figure 18.
4. Place blower unit back into microwave oven.
5. Reattach blower plate to microwave oven. Attach with the
one blower unit mounting screw and then the two blower
plate mounting screws.
See Figure 19.
exhaust
ports
INSTALLATION
back plate
exhaust
ports
Figure 15
Figure 18
blower unit
blower unit
exhaust ports
blower unit
blower unit
Parts "B"
Figure 19
- 15 -
blower plate
mounting screw
blower plate
back plate
blower unit
mounting screw
Figure 16
blower plate
mounting screw
blower plate
blower unit
mounting screw
Parts "B"
Figure 17
blower plate
mounting screw
blower plate
back plate
blower unit
mounting screw
back plate