LNA (Low Noise Amplifier)
If the TV is operating in a weak-signal area, the LNA function can improve the reception (a low-noise preamplifier boosts the
incoming signal).
1.
Press the MENU button to display the menu.
Press the ▲ or ▼ button to select "Channel", then press the ENTER
button.
2.
Press the ▲ or ▼ button to select "LNA", then press the ENTER
3.
Press the ▲ or ▼ button to select "Off" or "On". Press the enter button.
4.
Press the EXIT button to exit.
LNA functions only when antenna is set to Air or Cable.
➣
The LNA setting must be made separately for each channel.
➣
If the picture is noisy with the LNA set to "On", select "Off".
➣
Selecting the Color System
Selects a color system suitable for the input video signals.
1.
Press the MENU button to display the menu.
Press the ▲ or ▼ button to select "Channel", then press the ENTER
button.
2.
Press the ▲ or ▼ button to select "Color System", then press the ENTER
button.
3.
Press the ▲ or ▼ button to select "Auto", "PAL-M", "PAL-N" or "NTSC", then
press the ENTER
Press the EXIT button to exit.
•
Auto: Automatically sets a color system suitable for the input video
signals.
•
PAL-M: Outputs video signals in the PAL-M type color system.
•
PAL-N: Outputs video signals in the PAL-N type color system.
•
NTSC: Outputs video signals in the NTSC type color system.
This function is available only in analog TV mode.
➣
button.
button.
English - 50
Fine Tune
Signal Strength
LNA
:
On
Color System
: Auto
Fine Tune
Signal Strength
LNA
:
On
Off
On
Color System
: Auto
Signal Strength
LNA
: On
Color System
:
Auto
Signal Strength
LNA
: On
Color System
:
On
Auto
PAL-M
PAL-N
NTSC
►
►
►
►