Memorizing The Channels - Samsung 6 Series User Manual

Memorizing the Channels

Your TV can memorize and store all of the available channels for both "off-air" (Air) and "Cable" channels. After the available
channels are memorized, use the CH < or CH > button to scan through the channels. This eliminates the need to change
channels by entering the channel digits. There are three steps for memorizing channels: selecting a broadcast source,
memorizing the channels (automatic) and adding or deleting channels (Channel Lists).
Selecting the Video Signal-source
Before your television can begin memorizing the available channels, you must
specify the type of signal source that is connected to the TV (i.e. an Air or a Cable
system).
1.
Press the MENU button to display the menu.
Press the ▲ or ▼ button to select "Channel", then press the ENTER
button.
2.
Press the ENTER
Press the ▲ or ▼ button to select "Air" or "Cable", then press the ENTER
button.
Press the EXIT button to exit.
If the antenna is connected to ANT 1 IN
➣
(AIR), select "Air" and if it is connected to
ANT 2 IN (CABLE), select "Cable".
If both ANT 1 IN (AIR) and ANT 2 IN
➣
(CABLE) are connected, select the
antenna input you want.
If the antenna input is not selected
properly, noise may appear on the
screen.
Easy Setting
1.
Press the TOOLS button on the remote control.
2.
Press the ▲ or ▼ button to select "Switch to Cable" (or "Switch to Air)".
3.
Press the ENTER
button to select "Antenna".
button to switch Cable (or Air).
or
English - 1
Antenna : Air
Auto Program
Full Guide
Mini Guide
Default Guide : Mini Guide
Channel List
Fine Tune
Signal strength
Antenna : Air
Air
Cable
Auto Program
Full Guide
Mini Guide
Default Guide : Mini Guide
Channel List
Fine Tune
Signal strength
Tools
Device List
Guide
Picture Mode : Standard
Sound Mode : Custom
Sleep Timer : Off
Lock Current Channel
SRS TS XT : Off
Energy Saving : Off
Switch to Cable
Move Enter e Exit
►
►