Fine Tuning Channel Reception
If the reception is clear, you do not have to fine-tune the channel,
as this is done automatically during the search and store operation.
If however the signal is weak or distorted, you may have to fine-tune
the channel manually.
1
Press the MENU button.
Result:
The main menu is displayed.
Press the ¤or button to select Channel.
2
Press the ENTER
Result:
The options available in the Channel group are displayed.
Press the ¤or button to select Fine Tune.
3
Press the ENTER
4
Press the
/
button to select the channel that you wish to fine
tune.
Press ¦ or button until you reach the setting to obtain a sharp
5
and clear picture and good sound quality.
To store the setting, press the ENTER
To reset the fine tuning, select Reset by pressing ¤or button and
6
then press the ENTER
To return to the previous menu, select Return by pressing ¦ or
button and press the ENTER
LNA (Low Noise Amplifier)
If the set is operating in a weak-signal area, sometimes the LNA
function can improve the reception.
1
Press the MENU button.
Result:
The main menu is displayed.
Press the ¤or button to select Channel.
2
Press the ENTER
Result:
The options available in the Channel group are displayed.
Press the ¤or button to select LNA.
3
Press the ENTER
Result:
The LNA menu is displayed.
Select On by pressing ¤or button.
4
Result:
Amplifies signals when antenna reception is poor.
However if incoming signals are interfering with each
other, turn off LNA as it may malfunction.
5
When it has finished, press the EXIT button to return to normal
viewing.
or button.
or button.
button.
button.
button.
or button.
or button.
English-23