Sony DCR-TRV33 Service Manual page 90

Dubbing tape
Dubbing
If you are connecting the VCR with the A/V connecting cable
•Set DISPLAY in
•If a search indicator is displayed, press SEARCH MODE on the Remote Commander
to turn it off.
•If you want to dub the data code, display it on the screen.
•If you want to dub the title, set TITLE DSPL in
default setting is ON.)
If you are connecting the VCR with the i.LINK cable
•Recording of only the picture or sound cannot be done.
•Titles, screen indicators, Cassette Memory contents, and "Memory Stick" index screen
lettering cannot be recorded.
The POWER switch should be set to
(1) Insert a blank tape (or the tape you want to record over) into the VCR, and
(2) Prepare the VCR for recording. If the VCR has an input selector, set it to input.
(3) Play back the recorded tape on your camcorder.
(4) Start recording on the VCR.
When you have finished dubbing the tape
Press x on both your camcorder and the VCR.
You can edit on VCRs that support the following systems
8 mm
Betamax
If your VCR is a monaural type
Connect the yellow plug of the A/V connecting cable to the video input jack and the
white or the red plug to the audio input jack on the VCR or the TV. When the white
plug is connected, the left channel audio is output, and when the red plug is connected,
the right channel audio is output.
If your VCR has an S video jack
See page 45 for details.
About i.LINK
See page 202 for details.
82
to LCD in the menu settings. (The default setting is LCD.)
insert the recorded tape into your camcorder.
Refer to the operating instructions of the VCR.
Refer to the operating instructions of your VCR.
, Hi8 , Digital8
, ED Betamax
.
, VHS , S-VHS
, mini DV , DV
to ON in the menu settings. (The
, VHSC , S-VHSC
and MICROMV
,