Sony DCR-TRV33 Service Manual page 38

Recording a picture
Adjusting the brightness of the LCD screen
(1) When the POWER switch is set to CAMERA, press FN and select PAGE2.
(2) Press LCD BRT. The screen to adjust the brightness of the LCD screen appears.
(3) Adjust the brightness of the LCD screen using – (to dim)/+ (to brighten).
(4) Press
To return to FN
Press EXIT.
LCD screen backlight
You can change the brightness of the backlight when using the battery pack. Select LCD
B.L. in
Even if you adjust LCD BRT or LCD B.L.
The recorded picture will not be affected.
Shooting using the viewfinder is recommended when:
•You cannot see the picture clearly on the LCD screen.
•You want the battery pack to last longer.
30
When the POWER switch is set to VCR, press FN to display PAGE1.
When the POWER switch is set to MEMORY (DCR-TRV22/TRV33 only), press
FN and select PAGE3.
OK to return to PAGE1/PAGE2/PAGE3 in Step 1.
in the menu settings (p. 178).
2,3
LCD
BRT
OK
LCD BRT
The bar indicator