Sony DCR-TRV33 Service Manual page 137

Recording a picture from tape as a moving picture
Data code recorded on the tape
Instead of the date/time when the picture was recorded on the tape, the date/time
when the picture is recorded on the "Memory Stick" (transferred from the tape) is
recorded on the "Memory Stick." The various settings that may be saved on the tape are
not recorded.
Recording a moving picture from other equipment
You can use either A/V connecting cable or i.LINK cable. See page 93 for the
connection.
When connecting with the A/V connecting cable, set DISPLAY in
menu settings. (The default setting is LCD.)
The POWER switch should be set to
(1) Play back the recorded tape on the VCR, or turn the TV on to see a desired
program.
The image of the other equipment is displayed on the LCD screen or in the
viewfinder.
(2) At the starting point of the picture you want to record, press START/STOP.
Note
Recording may stop or the recorded picture may distorted when:
–There are blank portions on the tape.
– The tape on which the image you want to use was recorded, is in poor condition. For
example, if the tape has been repeatedly used for dubbing.
– The input signal is cut off during recording.
.
to LCD in the
129