Frequently Asked Questions - Pioneer DVR-225 Operating Instructions Manual

Additional information
13

Frequently asked questions

In this section you can find answers to frequently asked
questions on how to use your DVD recorder and what it
can do.
• What kind of discs can I use for recording?
You can use DVD-R and DVD-RW discs for recording.
DVD-RAM, CD-R and CD-RW discs are not
recordable using this recorder.
See Disc / content format playback compatibility on
page 11 for more details.
• Can I watch recordings made using this recorder on
other DVD players?
Yes. Use a DVD-R disc for you recordings (these are
always recorded in Video mode). After recording,
finalize the disc to make it playable on other DVD
players (note that you cannot make further
recordings on the disc after finalizing it).
If you want to use a DVD-RW disc, make sure that it's
initialized for recording in Video mode. As with a
DVD-R, finalize the disc after recording to make it
playable in other players.
See also Playing your recordings on other DVD players
on page 54.
• Can I edit recordings, or erase parts of recordings from
a disc?
Yes. Recording to a VR mode DVD-RW disc gives you
the most flexibility when editing. By default, when you
load a new DVD-RW disc into the recorder it is
initialized for recording in VR mode.
See also Editing on page 56.
• Can I play a VR mode DVD-RW disc in another DVD
player?
Look for the 'RW Compatible' mark on the other DVD
player to see if it will play VR mode DVD-RW discs. If
the player does not recognize the disc when you load
it, try finalizing it in the recorder, then try again.
See also Playing your recordings on other DVD players
on page 54.
• Can I record a copy-once protected program from a
subscription satellite or cable channel?
Yes, but you'll need to use a CPRM-compatible DVD-
RW disc initialized for VR mode recording. (Look on
the disc package to see if it is CPRM compatible.)
See also CPRM on page 43.
90
En
• Can I play a disc while recording?
Yes. For simultaneous recording and playback, use a
2x speed compatible DVD-RW initialized for VR mode
recording (the disc should be a DVD-RW Ver. 1.1 / 2x
or Ver. 1.2 / 4x CPRM-compatible).
See also Simultaneous recording and playback on
page 50.
• I changed the batteries in the remote control and now
it doesn't work!
Most likely the remote control ID does not match the
recorder. After changing the batteries, the remote ID
is reset to 1; if the recorder is set to something else,
the remote will not work with it.
See Remote Control Set on page 76 for how to set the
ID of the recorder and the remote.