Table of Contents
Advertisement
Editing
07
• Preview – Preview chapters: Select the chapter you
want to play; press
edit screen.
• Undo – Undo the last command (only works with VR
mode disc edits).
3
Press RETURN to get back to the menu options on
the left side of the screen.
4
To return to the Disc Navigator screen, press
RETURN again, or select 'Back' from the menu
options on the left.
Note
• When editing VR mode Original content, it may not
be possible to erase chapters less than five seconds
long.
• It may not always be possible to combine two
chapters, even though they are adjacent. If a chapter
has been divided into three, then the middle chapter
erased, it is not possible to combine the two
remaining chapters into one.
Erase Section (Erase Sec)
VR mode
Using this command you can delete a part of an Original
title, ideal for cutting out the commercial breaks in a
recording made from the TV.
1
Select 'Erase Sec' from the Disc Navigator menu
options.
2
Use the
title.
After selecting a title, the Erase Sec screen appears from
which you can mark the start and end points of the
section to erase.
Erase Sec
Original
DVD
Erase Sec
Back
60
En
STOP to return to the chapter
(cursor buttons) to select a
12/01Wed 12:18AM
SP
Title
2
Recording Time
0h01m24s
1-3
0.00.52.17
Play Pause
A
B
From
To
3
Use the playback controls ( , ,
find the start of the section to erase, then (with
'From' highlighted) press ENTER.
The bar at the bottom of the screen shows the current
play position in the title. After pressing ENTER, a marker
appears under the bar to show the start of the section.
A
4
In the same way, find the end of the section to
erase, then (with 'To' highlighted) press ENTER.
After pressing ENTER, another marker appears under the
bar to show the end of the section, with the section itself
marked in red.
5
Select 'Yes' to confirm, or 'No' to cancel, then
press ENTER.
In the thumbnail viewer you can see a few seconds of
video either side of the marked section to see how the
edit will look.
• When editing VR mode Original content, you may not
be able to erase very short sections (less than five
seconds).
6
Erase another section from the same title, or
press RETURN to get back to the main Disc Navigator
screen.
Inserting chapter markers into a title
VR mode
You can create new chapters within a title using the CHP
MARK button while playing the title or during recording.
This is useful not just for navigation of the disc content
but also for editing purposes.
PAUSE
1
Start playback of the title you want to create
new chapter markers in.
You can use the Play command from the Disc Navigator
menu to do this.
,
, etc) to
Play Pause
A
B
From
T
0.02.09.17
CHP
MARK
Advertisement
Table of Contents
